|
[China]
Trade Verify
Address: No.15,Shanqian Road,Economic Development Zone,Hebei,China
Contact name:Yan
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. |
|
Verified Suppliers
|
|
|
This production line is suitable for continuous longitudinal shearing strips with a width of 800- 1500mm and a thickness of 0.5-3mm for hot-rolled ordinary carbon structural steel, low-alloy structural steel and other materials. Referred to as 1500 × 0.5 ~ 3mm slitting unit.
1) Material Specifications:
| Raw Material | Hot rolled steel coil, material Q235B,Cold-rolled steel plate, galvanized sheet, etc |
| Outer diameter of steel coil | Φ800-1800mm |
| Inner diameter of steel coil | Φ508mm-610mm |
| Coil width | 800- 1500mm |
| Steel strip thickness | 0.5-3.0mm |
| Coil Weight | Max25 tons |
2) Finished Product:
| Inner diameter of steel coil | Φ508-610mm |
| Outer diameter of steel coil | Φ800-1800mm |
| Coil weight | Max25 tons |
| Unit Speed: | Drawing shear: 10-50m/min (thickness≤5mm) |
coil preparation 一loading car 一 uncoiler 一 straight head 一 centering vertical roller 一pinch leveler 一cross cutter 一 centering vertical roller 一 disc Shear 一 edge rewinder 一transition table一 steel belt separation feeding device一recoiler一unloading coil
| No. | Name |
| 1 | coil preparation table |
| 2 | loading car |
| 3 | uncoiler |
| 4 | straight head and pinch leveler |
| 5 | cross cutter |
| 6 | centering vertical roller |
| 7 | disc Shear |
| 8 | edge rewinder |
| 9 | transition table |
| 10 | feeding device |
| 11 | recoiler |
| 12 | unloading car |
| 13 | hydraulic system |
| 14 | electronic control system |
Packaging of equipment: All electric control cabinets, consoles, instruments, spare parts, etc. are packed in wooden boxes, and the cost shall be borne by the supplier. The machinery and equipment are naked, and waterproof and rust-proof measures are added during transportation.
Transportation of equipment: The transportation cost shall be borne by the buyer. ⑵Equipment installation and debugging:
A) The installation of the equipment shall be carried out by the purchaser, and the supplier shall be responsible for the guidance.
B) The supplier provides technical guidance for installation and commissioning.
C) The installation and commissioning time is about 25 days.
1. Equipment warranty for one year, long-term maintenance.
2. Provide general assembly drawing, foundation drawing, piping layout drawing, electrical schematic drawing, wearing parts drawing and other necessary drawings of the equipment.
3. The company has a full-time technical service team, mainly composed of engineers and technicians. After receiving the user's notification, we can give an immediate reply, and send someone to the user's site for after-sales service at any time.
