|
[China]
Trade Verify
Address: No.15,Shanqian Road,Economic Development Zone,Hebei,China
Contact name:Yan
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. |
|
Verified Suppliers
|
|
|
60 high frequency straight welded pipe mill line is used to manufacture welded steel pipe.After we absorbed advanced pipe making technology from both abroad and domestic, our innovative designed production line and each single unit of the production line is not only economical but also practical.
Round pipe size:25-60mm Square pipe size: 20X20-60X60mm Rectangular pipe size:20X25-40X80mm Pipe thickness: 0.6-3.5mm
⑴ Material Specifications:
| Material | low carbon steel galvanize and crabon steel tube |
| Mechanical properties | σb≤520Mpa,σs≤340MPa |
| strip width | 100 - 190 mm |
| strip thickness | 0 . 6 - 3 . 5 mm |
| I.D of Coils | Φ 480 - 510 mm |
| O.D of Coils | φ 1000 - 1600 mm |
| Coil Weight | ≤ 4T |
⑵ Welded Pipe Specification
| Pipe Diameter | Φ 25～ φ 60 mm |
| pipe thickness | 0 . 6 - 3 . 5 mm |
| Finish pipe length | 4 - 6 m |
| Cut length accuracy | ± 3 mm |
| Forming speed | 20 - 70 m/min |
⑶ workshop require : 100 m X 8 m ,at least 5m high
Notice:You can modify it according to the actual length of the workshop
Supplier offered
①equipment debugging and assist the buyer to install the equipment.
②Provide technical training.
③Provide complete after-sales service and permanent technical advice.
④Provide homemade and spare parts for equipment.
Buyer offered
①Power transformer and input power cable.
②Pipe and distilled water for cooling system.
③On the basis of the supplier's equipment layout and installation dimensions, the buyer is responsible for the heating equipment and welder infrastructure, including fastening racks, embedded parts, and mounting materials.
④Installation and debugging tools,production and maintenance tools.
⑤Responsible for on-site lifting, equipment installation and installation adjustment.
①The buyer shall install the equipment by itself and the supplier shall assist in the installation.
②The supplier provides a complete set of equipment installation dimensions and external wiring requirements.
③The supplier shall be responsible for the commissioning of the equipment and the buyer shall provide all necessary support except the supplier's equipment.
④The technical personnel of supplier shall comply with the management system of buyer's factory and comply with the organization and arrangement of buyer.
⑤After acceptance of the equipment, technical staff of the supplier shall provide the debugging report.
⑥Where the buyer shall provide accommodation and accommodation for the supplier's debugging personnel.
①Our company provides full set of technical drawings and operating instructions for maintenance.
②About technical principle and use and maintenance of the equipment, can hold a technical training class for the buyer free of charge.
③Train technicians of the buyer free of charge, providing guidance from the whole process of operation, production, debugging and installation.
④Once the equipment is accepted, the supplier shall leave a technician to monitor the equipment for 3 days.
⑤Within one year after receiving the equipment, the supplier is responsible for solving the abnormal quality of the equipment freely, and the response time is less than 24 hours (except for irresistible factors).
⑥After 1 year of acceptance, the maintenance cost shall be charged by the supplier until the service life of the equipment. The maintenance cost shall be composed of the traveling cost of the maintenance personnel, the salary during the absence, and the cost of replacement parts.
⑦The supplier shall be obliged to answer the technical questions related to the operation, maintenance and use of the equipment in detail within the service period of the equipment without violating the technology leakage.
