|
[China]
Trade Verify
Address: No.15,Shanqian Road,Economic Development Zone,Hebei,China
Contact name:Yan
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. |
|
Verified Suppliers
|
|
|
Product Description
Slitting Line , called slitting machine or longitudinal cutting line, is used to uncoiling, slitting, recoiling the steel rolls into demand width steels.It can be applied to process the cold or hot rolled steel coil, Silicon steel coils, tinplate coils, Stainless steel and color coated steels.
1.Function: It is used to the longitudinal cutting for the steel coils and rewinding the slit strips into coils.
2. Advantages: Convenient to operate, high cutting precision and utilization factor of the material, adopts the infinitive speed.
3.Structure: Compose of Decoiler, feeding device, slitting machine, recoiler (Rewinding) machine.
4.Material can be processed: galvanized steel, stainless steel tinplate, silicon steel ,copper and aluminum, etc.
Industries can be applied to: steel factory, transformer, electrical motor, electrical equipment, car, building materials, door, packaging industries.
Main technical parameters
| No | Name | Unit | Parameters |
| 1 | Materials | Carbon and galvanized steel coils | |
| 2 | Tensile strength | Mpa | δb≤400 ,δS280 |
| 3 | Thickness | mm | 0.5-4 |
| 4 | Width(max) | mm | 900-1600 |
| 5 | Coil ID | mm | Φ508 |
| 6 | Coil OD | mm | Φ≤1800 |
| 7 | Speed line | m/min | >80 |
| 8 | Blades specification | Φ260mmXΦ380mmX15mm | |
| 9 | Blades material | 6CRW2SI | |
| 10 | Knife pivot diameter | mm | Φ260 |
| 11 | Knife pivot material | 40Cr | |
| 12 | Power | 380V/50Hz/3Ph | |
| 13 | Capacity | kw | 200 |
| 14 | Whole line dimension | m | 25m(L)x8m(W) |
| 15 | Operator needed | 1 machanical engineer ,2 common workers | |
| 16 | Line direction | From right to left (face to machine) | |
| 17 | Machine color | Customized |
Process
From right to left are: Entry coil car→Hydraulic decoiler →Hydraulic press and pinch device→Hydraulic cutter→Looper 1→Side guide device→ Slitter→Scrap winder→Looper 2→Tension stand →Recoielr→Exit coil car
Equipment component
| No | Name | Quantity |
| 1 | Entry coil car | 1 set |
| 2 | Hydraulic decoiler | 1 set |
| 3 | Hydraulic press and pinch device | 1 set |
| 4 | Hydraulic cutter | 1 set |
| 5 | Looper 1 | 1 set |
| 6 | Side guide device | 1 set |
| 7 | Slitter | 1 set |
| 8 | Scrap winder | 1 set |
| 9 | Looper 2 | 1 set |
| 10 | Tension stand | 1 set |
| 11 | Recoielr | 1 set |
| 12 | Exit coil car | 1 set |
| 13 | Hydraulic system | 1 set |
| 14 | Electrical system | 1 set |
If you need detailed parameters of the machine, please tell me the
specifications of the sheet you need to process, I will provide you
with the data, to give you the technical solutions you need.
Such as:
1,coil .I.D (mm)
2,coil .O.D (mm)
3,MAX coil weight (Ton)
4,main material
5,max coil thickness (mm)
6,max coil width (mm)
7,voltage/ HZ
and so on :
Our Services
1.) We will send the engineer for the installation and training your workers how to operate this machine in correct way.
2.) One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
3.) We supply the pre-sell and after-sell service.
pre-sell service: workshop design, and production output design
after-sell service: installation and training, and the skilled engineer for working.
4.) We can also sent the engineer working for you serval months or 1 year. The engineer will help you to improve the output, reduce the waste and decrease the cost.
5.) We supply the pre-sell service-Design for whole project for stainless steel pipe making/ carbon steel pipe making.
6.) We will be responsible for the loading and shipping
