|
[China]
Trade Verify
Address: No.15,Shanqian Road,Economic Development Zone,Hebei,China
Contact name:Yan
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. |
|
Verified Suppliers
|
|
|
Introduction:
Thick plate cut-to-length line can meet customer's request of max
line speed 20m/min by uncoiling and leveling a coil strip, and then
shearing the leveled flat strip to certain length of sheets.
The cut-to-length line (plate CTL line machine) has one pre-leveling machine and one fine leveling machine driven by DC or AC motors, and the length-fixing is by encoder, shearing style is stop-shear.
The thick plate cut-to-length line is composed of: coil loading car, Double-mandrel decoiler, Portal-style coil-head guide, press & shoveling equipment, pinch-feeding & pre-leveling, transmit table,(side guide, edge trimmer, edge scrap winder, transmit table), side guide, Main Leveling machine, Final sheet sending out equipment, length-fixing encoder, Hydraulic shearing machine, delivery roll table & plates-sending-out equipment, pneumatically piling-up table, hydraulic system, electric control system, etc.
The thick plate cut-to-length line (plate CTL line machine) fit steel coils with thickness: (3~12mm, 4~16mm, 5-20mm) and changeable width, and length of finished sheets depend on customer's practical need.
Advantages & Characteristics of our Coil Slitting Machine:
1. Line speed can be up to 20m/min, 4-5pcs/min 2000mm Length sheets
in average.
Leveling precision: ±1.5mm/㎡
Sheet length precision: ±0.5mm/m
Sheet diagonal length precision: ±1mm/m
2. Weight of thick plate coils is heavy up to 30T, 35T or 40T,
double-cone decoiler is proper.
3. Strong portal-style coil-head opener including coil-head guide,
press and shoveler can make sure decoiling smoothly going on.
4. To make flat steel sheets, the diameter of leveling rollers
should be scientifically proper, we confirm diameter of leveling
rollers by actual experiences and engineering calculation when
processing the plate cut-to-length line.
5. The backup rollers installed in backup bracket can tightly back
leveling rollers up to make sure no deformation of leveling rollers
while leveling.
6. Twice leveling is arranged in the thick plate cut-to-length
line, to ensure good leveling effect.
Customer can choose to include edge trimmer, to trim off the
useless edges.
7. Final-sheet sending-out equipment sends finished sheets onto
pneumatic packing table.
8. We adopt good quality parts for the plate CTL line machine
supplied by famous brand company, e.g. Mitsubishi PLC control,
Yuken/Fuxin hydraulic parts, HRB/ZWZ/SKF bearings,etc
The detail specification as follows:
Plate CTL line machine Strip thickness: 4~16mm
Strip width: 500~1500mm/800-2000mm/1100-2500mm
Leveling roller: Φ220mm, 11pcs
Material of leveling roller: 40Cr, HRC54-55
Plate CTL line machine Power for leveling: 160KW DC motor +
Eurotherm 590 DC speed control.
Cutting speed: (0~20) m/min, adjustable
Specification form of Coil Slitting Machine:
| Model | thickness | width | Length | Leveling speed |
| CTL-12 x 1600 | 3.-12mm | 600-1600mm | adjustable | Max 20m/min |
| CTL-16 x 1800 | 4-16mm | 1000-1800mm | adjustable | Max 20m/min |
| CTL-20 X 2000 | 5-20mm | 1000-2000mm | adjustable | Max 20m/min |
| Note: The data in the form just as reference according to general ranges, we always design and make each thick plate cut-to-length line,plate CTL line machine according to each customer's specific requirements, so each customer can buy his own well-content line from us. | ||||
