Active Member
|
[China]
Address: Address: Building A, He Kang Road No. 1, Jiu Jiang Shui, Changping Town, Dongguan Guangdong, China.
Contact name:Julia Wong
Hong Kong Chuang Sheng Electronics Co.,Ltd. |
|
|
60W Fresh Air Energy Saving Heat Recovery Ventilation System
Description:
1. Double skin galvanized steel sheet, aluminium alloy frame, 30mm
thick PU insulation.
2. This heat recovery unit is mainly used for heat recovery and
ventilation, combined with supply fan and motor, exhaust fan and
motor, heat recovery wheel and filters.
3. Energy saving and improve indoor air quality: this fresh air
unit can not only introduce fresh air to improve indoor air
quality, at the same time, it exchanges heat with exhaust air,
which can precool for preheat fresh air, save much energy.
4. Cooling coil or heating coil is optional at supply air section
to be heat recovery AHU.
5. Silica-gel heat recovery wheel, full heat recovery, high
efficiency up to 80%.
6. Washable nylon prefilter or plate filter G4 is installed at air
intake. Bag filter is optional.
7. Air volume: 206 CFM
8. Standard power supply: 220V /50Hz.
Advantages:
1. Heat and energy heat recovery, saving energy for building
consumption.
2. Introduce fresh air, exhaust polluted air, improvde indoor air
quality;
3. Wide volume range, meet different requirements of industrial,
commercial and residential building;
4. Good quality heat exchange device, high efficiency and long
lifespan.
5. Easy for maintainance and operation, low cost.
► WORKING PRINCIPLE OF HEAT EXCHANGE
► TECHNICAL PARAMETERS
► SPECIFICATION
| NAME | Fresh Air Energy Saving Heat Recovery Ventilation System |
| FRESH AIR VOLUME | 206 CFM |
| PURIFYING RATE | PM2.5-99.9% |
| POWER | 220V/50HZ |
| MAX. POWER | 60W |
| WEIGHT | Kg |
| APPLICABLE AREA | 100-140m2 |
| AIR SUPPLY MODE | Duct air supply |
► SIZE
► WORKING PRINCIPLE
1. Pre filtration wire mesh
2. Primary filter
3. Outdoor temperature sensor
4. Heat exchanger
5. Activated carbon, CO2 sensor
6. Negative oxygen ion
7. High efficiency filter
8. Indoor temperature sensor
9. Power Supply 220V 50HZ
10. Fresh air fan
11. Exhaust fan
12. Outdoor fresh air inlet
13. Indorr fresh air inlet
14. Indoor exhaust inlet
15. Outdoor exhaust inlet
16. Hook
17. Hook
18. Hook
19. Hook
► DETAIL DISPLAY
Touch color display
TFT real color screen, more refreshing color, sensitive touch, simple operation
Stable and durable ceiling hook
Made of high quality stainless steel, not easy to rust, durable
Easy to replace consumables
Unscrewing the stud manually can replace the consumables, which is convenient and quick
The cabinet is light and thin
Ceiling type installation, light and thin, does not take up space height
intelligent management
Mobile app intelligent control system, real-time control of air quality, monitoring the use of consumables.
【Standard configuration】 【Optional configuration】【Optional configuration】 【Standard configuration】
G1 non woven fabric filtration Negative oxygen ion Activated carbon filter screen H13 high efficiency filtration
Filter layer by layer and purify thoroughly
Protect the health of you and your family
Eliminating visible and invisible air pollution
Pet hair Urban waste Pollen PM2.5 Second hand Viral Formaldehyde
gas smoke bacteria
Special fan
Big wind wheel Low speed Low noise Long service life
► Fresh air and exhaust air use one brushless DC motor
► The wind wheel and impeller is designed, moulded and processed by our company.
We can control the quality effectively.
► Wind wheel is 2.5 times larger than other brands.
► It has the characteristics of high efficiency, low noise, large air volume and stable operation.
special volute big air volume DC brushless special volute
wind wheel motor
COOPERATION PARTNER
Our Services
Our staffs of sales and technical support is available to help you in selecting the right protection for your application as well as to provide you with samples of our products for evaluation. At CS, we are committed to providing the highest level of customer service, competitive pricing, speedy delivery and a comprehensive, cutting-edge product offering. Our ultimate goal is your satisfaction.
We need to know the size, quantity and others.
Discuss all the details with you and make the sample if needed.
Start the mass production after getting your payment (deposit).
Delivery.
Receive your air goods.
Quality Control
Before the order to be confirmed, we would show you the certificate of each details .
Every ERV will be quality checked before packing.
Before delivery clients could send QC or the third party to check the quality. We will try our best to help you when problem occurred.
After-sales Services
Any problem happening in our products will be solved at the most prompt time.
We always offer relative technical support.
Quick response, all your inquiry will be replied within 24 hours.
Q: About CS ERV ventilation lifetime
A: The lifetime will vary depending on the hours of usage, air
quality and location of the ERV air cleaner. Normally the filter
will need to be replaced semiannually. Clean the dust and
contaminants with vacuum cleaner or hair dryer (cool air) and dry
it out in the sun for 3 hours to maintain the best purifying
effect.
Q: Are you a factory?
A: Yes, we are a ISO9001-certified factory devoting to the
developing, manufacturing and sales of the fresh air ventilator.
Q: I need your price list of all products, do you have a price list
?
A: We do not have a price list of all of our products. Because we
have so many items, and it's impossible to mark all of their price
on a list. And the price are always changing because of the
producing cost. If you want to check any price of our products,
please feel free to contact us. We will send offer to you soon!
Q: I can't find the product on your catalogue, can you make this
product for me?
A: Our catalogue shows most of our products, but not all. So just
let us know what product you need and how many you want. If we do
not have it, we can also design and make a new mould to produce it.
For your reference, making a ordinary mould will take about 35-45
days.
Q : Can you make customized products and customized packaging?
A: Yes. We've made a lot of customized products for our customers
so far. And we've made many moulds for our customers. About
customized packaging, we can put your logo or other labels on the
packaging. It's no problem. Just have to point out that , it will
cause some additional cost.
Q: Can you provide samples ? Are the samples free ?
A: Yes, we can provide samples for test or quality checking. And
sample cost will be refunded when bulk order is over MOQ.
Q : How to ship my order? Is it safe?
A: For samples, we will send it by Express, such as DHL, FedEx,
UPS, TNT, EMS.That's a Door to Door service. For bulk orders, we
will send them by air or by sea. We will use good packing and
ensure the safety. We will be responsible to any product damage
caused on delivery.
Q: Do you have a guarantee of your product quality?
A: We have a guarantee of one year.
Q: Can I become an Agent / Dealer of CS products?
A: Welcome! But please let me know your country / area first, We
will have a check and then talk about this. If you want any other
kind of cooperation, do not hesitate to contact us.
OUR FACTORY
