eps CNC cutting machine

WB-SKQG series CNC cutting machine

The foam cutting machine is controlled by a PC computer capable of cutting most of 3D objects out of EPS. The cutting is performed with a resistant hot wire moving in the vertical and horizontal axes through the use of stepper motors controlled by an electronic controller connected to a PC and controlled with our software. Almost any 2D or 3D shape prepared in graphics software (CorelDraw, AutoCad, Rhino3D, etc.) can be loaded in and cut in foam in minutes! All our units can be equipped with TurnTables and other additional add-ons making them truly versatile and limited only by the operator's imagination.......

LETTERING & LOGOS

* PreCast Concrete Molds

* Pipe Insulation

* Columns

* Store Props & Displays

* P.O.P. Displays

* Prototype Products

* All kinds of Packaging

* Theme Props

* Amusement

- cutting wire length: 130cm,250 cm, 305cm

- number of cutting wires:1

-width:  129m

-cutting wire type: titanium Alloy

-cutting wire thickness: 0.15, 0.25 or 0.45 mm

-wire movement: stepper motors, belt driven on ball bearing transport wheels

-wire tensioning: automatic, wire tension maintained at all times

-wire tensioning type: spring

-wire heating: instant ON/OFF, temperature controlled on PC

-maximum wire speed: 300cm/min

-accuracy: 1mm/meter

-resolution: 0.5mm

-machine construction: custom-made anodized aluminum extrusion profiles

-accessibility: full access from all four sides

-power requirements:  110 or 220 Volt. 50 or 60 Hz 50 or 60 Hz

-operation environment:  Temperature: 32F - 104F or 0 - 40C. Humidity: 95%

-computer operating system: Windows 98 or later (including XP)