High Compression Resistance 750mm Wide Laboratory Black Epoxy Resin
Thickness: 19 mm
Mini order : 30 pcs
Delivery time: 15-30 days after receipt of deposit.
Custom colors may be requested (availability based upon ability to
match custom color and job size).
A color chip must be submitted to us when requesting a customer
Allow a minimum of eight weeks for shipment after cusomer approval
of ShengStone epoxy resin
Custom color sample
3.Physical And Chemical Properties
One core, not to take off layer, not inflation, not cracked,surface
scratches can be repaired after renovation
Surface is smooth, no stoma, not to hide the dirt, effectively
restrain bacterial growth, such as the SARS virus, etc.,especially
suitable for the medicine and biological laboratories.
C).Safe and reliable
Do not contain asbestos ingredient, nonflammable, non-conductive,
do not produce poisonous gas when heated, will not violate the
safety and health of operator.
D).24 hours super corrosion resistance
Inert materials have strong resistance to most corrosive chemicals.
Resistance to high temperature
E).And laboratory common high temperature 600 degrees, not foaming,
not broken, especially suitable for a long time to place the
combustion furnace ventilation cabinet.
Smooth surface (MATT finish) , light reflection, easy to clean,
The epoxy resin worktop with low water absorbition, does not absorb
moisture in the air, the installation will not warp deformation,
especially suitable for the operation of splash zone.
Ensure the color of different batches of products is permanent, can
be used for multi color selection.
I).High performance to price ratio
Unique 19mm thickness, the market is the highest price of the
laboratory table system.
Physical Test Results
|No.||Test Item||Test Method||Result|
|1||Compressive Test||ASTM D695-10||24000psi|
|2||Deflection Temperature Under Load||ASTM D648-07||262℃|
|4||Flexural Strength||ASTM D790-10||12200psi|
|Flexural Modulus||Method A||2350000psi|
|5||Rockwell Hardness||ASTM D785-08||HRM98.3|
|6||Horizontal Burning||ASTM D635-10||Classification:HB|
|7||Water Absorption||ASTM D750-98(2010)e1||0.03%|