|
[China]
Trade Verify
Address: 1001，Logistics Center NO 1 Hai Tian Rode,Xiamen,China
Contact name:
shengstone international limited |
|
Verified Suppliers
|
|
|
2018-3-28
1. Product Description Of Epoxy Resin Slabs
| 1 | Name: | Custom Grey Epoxy Resin Sheet Durable Strong Acid Resistance SGS Listed |
| 2 | Description: | home furnishing kitchen new products countertop quartz stone |
| 3 | Materials: | High purity acid-washed 93% quartz stone, 7% polymer material and a small amount of inorganic pigment |
| 4 | Color: | White, Black, Light Grey, Dark Grey |
| 5 | Size: | a)-Slabs size: 3000*1200 mm, 3200*1600 mm |
| b)-Countertop:Customized to Customer Requirements | ||
| 6 | Thickness: | 16 mm, 19mm, 20mm |
| 7 | Finish: | a)-Surface Finish: Polished, Matt |
| b)-Side Finish: Flat, Marine Edge | ||
| 8 | Ideal Use: | countertops, table tops,bench top, island tops, Primary, secondary, university, scientific research institute, enterprise, education, biochemistry and other laboratories |
| 9 | Packing: | a)-Slabs: 15-20pcs pack in a seaworth bundle (after funmigation) |
| b)-Cut-to-size:60-80pcs pack in a seaworth crates (after funmigation) |
2. Epoxy Resin Slabs Colors
Custom colors may be requested (availability based upon
ability to match custom color and job size).
A color chip must be submitted to us when requesting a
customer color.
Allow a minimum of eight weeks for shipment after cusomer
approval of ShengStone epoxy resin
custom color sample.
3. Physical And Chemical Properties Of Epoxy Resin Slabs
Ⅰ ). Durable
One core, not to take off layer, not inflation, not cracked,surface scratches can be repaired after renovation
Ⅱ ). Pollution resistance
Surface is smooth, no stoma, not to hide the dirt, effectively restrain bacterial growth, such as the SARS virus, etc.,especially suitable for the medicine and biological laboratories.
Ⅲ ). Safe and reliable
Do not contain asbestos ingredient, nonflammable, non-conductive, do not produce poisonous gas when heated, will not violate the safety and health of operator.
Ⅳ ). 24 hours super corrosion resistance
Inert materials have strong resistance to most corrosive chemicals.
Resistance to high temperature
Ⅴ ). And laboratory common high temperature 600 degrees, not foaming,
not broken, especially suitable for a long time to place the
combustion furnace ventilation cabinet.
Ⅵ). Beautiful appearance
Smooth surface (MATT finish) , light reflection, easy to clean, easy maintenance.
Ⅶ ). Absolute moisture
The epoxy resin worktop with low water absorbition, does not absorb moisture in the air, the installation will not warp deformation, especially suitable for the operation of splash zone.
Ⅷ ). Uniform color
Ensure the color of different batches of products is permanent, can be used for multi color selection.
Ⅸ ). High performance to price ratio
Unique 19mm thickness, the market is the highest price of the laboratory table system.
4. Physical Test Results Of Epoxy Resin Slabs
| No. | Test Item | Test Method | Result |
| 1 | Compressive Test | ASTM D695-10 | 24000psi |
| 2 | Deflection Temperature Under Load | ASTM D648-07 | 262℃ |
| Method B | |||
| 3 | Flexural Strength | ASTM D790-10 | 12200psi |
| Flexural Modulus | Method A | 2350000psi | |
| 4 | Rockwell Hardness | ASTM D785-08 | HRM98.3 |
| Procudure A | |||
| 5 | Horizontal Burning | ASTM D635-10 | Classification:HB |
| 6 | Water Absorption | ASTM D750-98(2010)e1 | 0.03% |
| 7 | High Temperature Resistance Test | No bubbles,rupture,deformation on the surface |
