Home Companies Chongqing Aorun Industrial Co., Ltd.

Aorun Brand Car Spare Parts Break Disc Brake Disk

Chongqing Aorun Industrial Co., Ltd.
Active Member

Contact Us

[China] country

Address: Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China

Contact name:Gelon

Inquir Now

Chongqing Aorun Industrial Co., Ltd.

Aorun Brand Car Spare Parts Break Disc Brake Disk

Country/Region china
City & Province chongqing chongqing
Categories Bicycle Brake
InquireNow

Product Details

 

Paint Liquid Polyurethane Anti Corrosion Paint Polyurethane Roof Coating

 

 

Quick Detail:

 

 

Name Art resin 9431Usage
Building Coating, Roof Coating
Type BPAFunctionAnti-corrosion, beautiful, anti-yellowing, transparent, non-toxic and harmless
 
 
Description:
  
 
Chemical resistance water proof lining coat series is polymer coatings made from Polyurea resin. Due to its excellent flexibility and strength, it is highly compliant with the occurrence of deterioration and behavior of cracks. The coat is strong against chemicals, sea water and high weather resistance. The coated surface protects your valuable chemical plant, production facilities, plant equipment and inner surface of the chemical Tank and factory water way or floor from corrosion. You can paint easily by painting brush and roller on metal or surface of concrete and curing time is fast.
 
 
Advantages:
 
 

1.Good weather resistance, UV resistance, no filming, no cracking, strong gloss retention, no fading, no loss of light, excellent decorative effect.
2.High hardness, impact strength, wear resistance and strong mechanical properties.
3.Good corrosion resistance, solvent resistance, acid and alkali resistance, chemicals, and salt water resistance.

 
 
Specification:
 
Items
Units/conditions
 
Technical Data
Viscosity
Shore-D
80-85
Volume resistivity
25℃/ Ω./ cm
4.3x1015
Surface resistivity
25℃/ Ω.
2.6x1014
Dielectric strength
25℃ KV/MM
25
Coefficient of linear expansion
CM/K
<6.1x10-5
Glass transition temperature
>90
Temperature resistant
-60~120

 

The above performance data is typical data measured in a laboratory environment
with a temperature of 25°C and a humidity of 70%. It is for customer reference only
 
 
 
Operative method and tips:

         

 

         1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately                     weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
         2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please                      pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal                        the lid,to avoid the product due to moisture absorption scrapped.
         3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a                             whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to                     use the heating and curing.
         4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
 
 
Application :
         
 

1. Metal surface in atmospheric environment: steel structure, bridges, containers, ships, hydropower stations, roofs, building facades, etc.
2. Underground facilities: buried pipelines, storage tanks, heating pipelines, oil pipeline outer walls, cement concrete structures, etc.
3. Wet area or underwater area: sewage pipe inner wall, sewage treatment pool, underwater steel structure, marine facilities, etc.
4. Stainless steel, aluminum alloy, aluminum composite panel, plastic steel, glass steel, plastic, etc.

 

 

FAQ:

 

 

Q: Are you factory or trade company?
A:100% factory,can offer you the best price.

Q: Are you manufacturer or trading company?

A: We are professional manufacturer and we have our own factory.

Q: Can we visit your factory?

A: Yes.

Q: How about your payment?

A: Normally 30% deposit in advance, 70% balance before shipment by T/T, other payment terms also can be negotiated.

Q: Can we place OEM order?

A: Yes, we support OEM order. Brand,Logo & Packing Size all can be customized

 
 
Packaging:
 
 
             We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized

     
 
 
Company Display:
 
 

 

Hot Products

Art Resin For Craft Wood River Tables Bar Top Coating And Casting Quick Detail: Name Art resin ...
Fast Dry 5 Minutes Crystal Clear Epoxy Resin Art Hardener Manufacturers Price Quick Detail: Name Art ...
Epoxy Resin Art Resin Crystal Clear Formula- The Artist'S Resin For Coating Quick Detail: Name Art ...
Factory Custom Epoxy Resin For Coating Casting Tabletop Tables Non-Toxic Quick Detail: Name Art ...
Fast Dry Crystal Kit Resin Table Art Hardener Wood Coating Two Part Quick Detail: Name Art resin ...
2 Part 1:1 Crystal Clear Epoxy Resin Art Kit For DIY Jewelry Crafts Quick Detail: Name Art resin ...