EPS wire mesh panels, 3D mesh panel, EPS 3D wire mesh panel, 3D Panel Construction Processing

Nowadays, because the requirement of building insulation, flame retardance, 

insulation hanging system become very strictly, EPS mesh panel always is one of major application;

It made of steel wire frame and EPS block board. The advantage is as below:

1. Light weight: less than 4kg/㎡;

2. Good load-bearing: size: 8 feet X4 feet; thickness:110mm; covered by cement; the heating insulation is 0.5W/(m.k).

3. Heat insulation and warm-keeping. As EPS is highly thermal insulation, 

    The 3D panel can be thermally insulated with 0.5 W/ (m.k).

4. Reliable steel mesh structure, perfect adherence between cement and sand; With 3mm steel crossing horizontally 

    and welding with cement, The load-bearing of the 3D panel is above 300kg//㎡;

5. Good adherence of the 3D mesh panel with sand & cement in both sides which can insulated the fire effectively, 

    it meets the State fire resistance requirement : B1 (construction fire prevention)

Besides of the above advantages, the 3D mesh panel also easy to be installed and splice with high working efficiency: 

as designed, the plate can be spliced into any flat shape such as folding shape and curving shape: 

and it is easy to lay inside apparatus(such as electricity, water, gas) and outside attached structure. 

Currently, there is two typical application of EPS mesh panel: Single layer and double layer. 

Single layer is mainly used in lease than 5 floors, while double layer can used in lease 20 floors.

3D Panels Specifications:

In recent years, EPS steel panel has a widely application on floor and stairway which plays a great role 

on heating insulation, Sound insulation, Vibration proof, reduce house weight;

It has widely application of Iran, South America, South-east Asia and Africa now. 

We predict that this construction model of EPS steel mesh panel may have a good market in the future;

Construction Process of 3D mesh panels

1. After setting up the fixed metallic materials upon the foundation concrete, the panel is to be between stabilized. 

2. Tie up the connecting line of #22, every kind of strengthened mesh between concrete and panel, panel and panel.
3. Lay under the ground the essential electrical pipes and all types of arrangements pipe.
4. Finish with the examination to the assemblage, horizontality and verticality, reinforcement and pipe arrangement status.
5. Finish the global body with the first time mechanism of spraying cement mortar, and with the second time hand plastering of skimming coating.
6. It can be finalized with every type of materials in correspondence to its usage like pitching, tiling, marbling, paper hanging, painting etc.
7. If used for more than second floor building, the construction procedure is like this: 1 assemble the  lower part wall, 2 lay down the foundation concrete, 3 assemble the upper part wall, 4 mechanical plastering on the lower part, 5 spraying after laying down the foundation concrete on the upper part.

HESLY 3D mesh panels installations:

Contact HESLY for a free quote or more details:

Email: hesly@heslymetalmesh.com

Tel: +86 188 3181 6606