Active Member
|
[China]
Address: No.11 Wusong 1st Street, Dongcheng District, Dongguan 523117, Guangdong, China
Contact name:Choi
Guangdong Bell Experiment Equipment Co., Ltd |
|
|
Single Layer High Temperature Accelerated Aging Chamber Manufacturer for Battery Cell and Module
DGBELL’s Temperature Aging Test Chamber is widely used for the aging test for electronic products, solar panel, plastic products, especially for battery temperature aging test.
Main Technical Parameter
Model | BTG-720 | BTG-1000 |
Test Space mm | W1000*H1200*D600 | W1000*H1000*D1000 |
External Dimension mm | W1200*H1815*D920 | W1400*H1850*D1270 |
Temperature Range | RT+10℃ ~ +150℃(Fully controllable, adjustable control accuracy ±0.1℃) | |
Temperature Fluctuation | ±0.3℃ | |
Temperature Uniformity | ≤±2℃ (at no load, constant state) | |
Observation Window | W300*H300 MM, explosion-proof glass and affixed with explosion-proof film | |
Cooling Method | Air-cooled | |
Control Mode | Touch screen programmable control PLC, with USB interface, with RS485 interface can be connected to computer control, special network control software, convenient remote monitoring, data acquisition | |
Test Space material | SUS304# mirror stainless steel, 1.0MM thick, sprayed Teflon insulation | |
External Dimension material | Galvanized plate, powder coating, high temperature plasticization, 1.2MM thick | |
Safety Protection | Automatic explosion-proof pressure relief device, explosion-proof chain, tricolor light device alarm, remote monitoring, smoke exhaust device, fire extinguishing device, etc. | |
Lead Hole | Φ100mm left and right each open one with soft silicone plug and stainless steel cover | |
Expansion Function | Open communication protocol and charging and discharging machine supporting use | |
High Temperature Accelerated Aging Test Chamber Purpose
DGBELL’s high temperature aging test chamber can provide a stable test space for pre-heating, drying, changes in physics and chemistry testing.
Characteristics
1. Outside SECC steel, fine powder coating treatment. Inner SUS#304
stainless steel.
2. Use new heat resistant long shaft motor.
3. Turbine fan.
4. Silicone forced tight.
5. Over-temperature protection, super load automatic power system.
6. Circulation system: air force level cycle.
7. Heating system: PID + S.S.R.
8. Timer: temperature to time, when the facility failure alarm
indication.
9. Consistent with customer demand matching glass windows are often
customized consistent with customer specifications
specified.
