Home Companies BOTO GROUP LTD

SECC Pt100 Steel Semiclosed Constant Temperature Chamber Stability

Contact Us

[China]

Trade Verify

Address: Room 2304, Fortune Plaza, No. 5616 Caoan Road, Anting Town, Jiading District, Shanghai

Contact name:Sherry Zhang

BOTO GROUP LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SECC Pt100 Steel Semiclosed Constant Temperature Chamber Stability

Country/Region	china
City & Province	shanghai shanghai

Product Details

Constant Temperature Humidity Stability Environmental Test Chamber Temperature Humidity Test Chamber

Climatic Chamber is used to test the material characteristic for wire type, skin type, plastic, rubber, cloth, Equiped with a special ventilation regulator for maintain the fresh air inside when heating. This testing machine design with sophisticated air-displacement adjustment device and a digital voltage meter, current meter, watt-hours, the timer can be used to measure the air replacement rate. Horizontal circulatory air supply system and both sides of airflow regulator to ensure the internal temperature uniformity and stability.

Features

1. Outside SECC steel, fine powder coating treatment; Inner SUS#304 stainless steel;
2. Use new high temperature resistant long shaft motor;
3 Turbine fan;
4. Silicone forced tight;
5. Overtemperature protection, super load automatic power system;
6. Circulation system: air force level cycle;
7. Heating system:PID+S.S.R;
8. The thermostat: PID microcomputer control, automatic constant temperature, temperature quickly compensation function;
9. Timer: temperature to time, when the power failure alarm indication;

10. According to customer demand matching glass window can be customized according to customer specifications specified.

Application

This machine is designed specially for drying of material which is thermo-sensitive or decompounded and oxidative easily. It can be filled with inert gases, which is especially for a rapid drying of some compound material.

Model		BT-280	BT-2150	BT-2225	BT-2408	BT-2800
Inner Size W×H×D(cm)		40×50×40	50×60×50	50×75×60	60×85×80	100×100×80
Outside Size W×H×D(cm)		93×155×95	100×148×106	117×166×91	140×176×101	170×186×111
Volume (V)		80 L	150L	225L	408L	800L
Temp and Hum Range		A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98%
Function	Fluctuation	±0.5°C ±2.5%RH
	Deviation	±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)
	Controller Analytical Accuracy	±0.3°C ±2.5%RH
Wind Cycling Way		Centrifugal fan-broadband type forced air circulation
Refrigeration Way		Single stage compression refrigeration
Refrigerator		French Tecumseh
Refrigerants		R4O4A USA DuPont environmental protection refrigerant(R23+R404)
Condensing Way		Air-cooled or water-cooled
Heater		Nickel chrome heating wire heater
Humidifier		Semi-closed steam and wet
Water Supplying Way		Automatic cycling water supply
Safety device		Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system

COMPANY INFORMATION

BOTO GROUP Ltd. is a private enterprise integrating R&D, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.

Main equipment

Constant Temperature and Humidity Test Chamber
Salt Spray Test Chamber / Corrosion Cyclic Salt Spray Test Chamber
UV Accelerated Aging Test Chamber
Mini Environmental chamber / Desktop Environmental Test Chamber
Walk in Constant Temperature and Humidity Lab
High Temperature Chamber and Other Lab Test Equipment etc.

^{_{In the domestic market, we have many end customers, third-party
testing institutions, research institutes, leading enterprises in
different industries, and some agents. For the overseas market, we
hope to find more general agents, distributors and importers to
cooperate together.}}

Main market

The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.

Production Details

Factory Inspection
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.

Workshop Machine

Certification

TRADING PROCESS

Cooperative partners

Our Service

1.High quality guarantee.
2.Shipment with professional documents.
3.Packing as your request, with photo before shipment.
4.Reply within 48 hours and provide solution within 3 working days
5.Professional after-service from our technical team
6.Warranty period 12 months