Heating Vacuum Chamber Thermal Shock Control Cycling Test Chambers
With Air / Water Cooling
2 Zone Heating and Cooling Thermal Shock Test Chamber used to test the material structure or composite material in an
instant by the extremely high temperatures and very low temperature
continuous environment which can endure the degree of order in the
shortest possible time to test its thermal expansion and
contraction caused by chemical changes physical harm.
The applicable the object material, including metals, plastics,
rubber, electronic, ..., etc., can be used as the basis of its
product improvement or reference.
Inner size selection
|Inner size WxHxD(cm)||36×40×35||40×50×40||50×60×50||60×75×50||80×85×60|
|External size WxHxD(cm)||138x180x155||150X190X160||190x200X195||210x220X205||225x250x220|
|Shock Temperature ragne||-75°C~150°C|
|Heating up time||RT~200°C about 35min|
|Cooling down time||RT~-70°C about 90min|
Temp recover time/
|≤5min / ≤10sec|
|Temp control accuracy||±0.5°C / ±2.0°C|
|Inner materials||SUS 304# stainless steel plate for inner chamber,and stainless
|+ spray painting for external chamber.|
|Insulation materials||High-temperature high-density amino acid ethyl ester foam insulator
|Systems||P.I.D+S.S.R+Microcomputer balanced temperature control system.|
|Cooling systems||Semi-hermetic two-stage compressor (water-cooled) /|
|hermetic two-stage compressor (air-cooled).|
|Safety devices||Fuse switch, high and low pressure protection switch compressors,|
|refrigerant pressure protection switch failure warning system,
|Fitting||Outlook window (special purchase), the upper and lower adjustable|
|compartment two energized measured line hole, casters,level
|Power||3 phase AC380V 50HZ/60HZ|
|Controller||"TEMI" Korea or Japan's "OYO"|
|Compressor||Germany Bitzer Brand|
GB11158 GB10589-89 GB10592-89 GB/T10586-89 GB/T2423.22-2001 GB/T2423.1-2001
GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93 ASTM D1735 EIA - 364-59
IEC60068-2-1.1990 IEC60068-2-2.1974 IEC 68-2-30 IEC68-2-03 EIA -
3-zone Thermal shock chamber have been designed to operate in
accordance with reliability programs, quality control, commercial
test programs and medical tests. It is used to test the capability
of material structure or composite material to withstand the
continuous environmental changes between extremely high temperature
and low temperature during a short period. It is applicable to
metals, plastic, rubber, electronics amongst other materials. The
test result can be used as a reference or basis for produce
1.Thermal shork chamber in each zone for peak demand of heating and
cooling. Provides extra thermal energy to efficiently meet the
MIL-STD 883 requirements.
2.Temperature recorder provides 24 hour part temperature recording
as the load travels from zone to zone. Using touch-control graph
control as operation interface, easy to operate.
3.The system can be used for automatic Circulation Shock or manual
selective shock, capable of setting two zones or three zones shocks
as well as cold and thermal shock start-up.
4.Custom-made and optional accessories available.
♣ How long will it take from order placement to goods delivery?
For standard environmental chambers, we have semifinished products
and finished products, the delivery time is about 15days.For
non-standard environmental chambers, the delivery time is about
♣ How many certifications do you have for drive in test room for car ?
We have passed the CE certification, the ISO certification and SGS
♣ What solutions will you provide if your products break down ?
We will give you guidance through video conference/picture when we
receive your notice of repair. If necessary, we could also send our
engineers to your country for troubleshooting.
♣ How to install and use the drive in test room for car?
The product is shipped with an operating instructions and video of
English version.For large walk in test chamber that can't be put
into the container, we will dismantled it first and send our
engineer for installating.
1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for batch goods, for FCL; Airport/ Port
3. Customers specifying freight forwarders or negotiable shipping
4. Delivery Time: 7-10 days for samples; 15-30 days for batch
1.all of our products will be checked one by one before shipping;
2.customer should check the package when receiving;
3.all machine wihin 1 year free warranty, but here is not warranty
if that's obviously caused by man-made
free technical support always;
4. due to the low vaule of the accessories,we don't accept any return or exchange.
1. Pre-sales service
- 24 hour online to ensure quick response.
- Professional guiding derpartment to make the best proposal
- China top manufactory to ensure the quality and details servive.
2. Producing process
- OEM and ODM is achieved.
- Semi-manufactures photos can send to you during the producing
- Clearance documents will send to you through DHL
- Update the latest new about the delievery.
3. After-sales service
- One year warranty
- Broken spare parts will be free sended again.
- Installation guidance is achieved.