100-300RPM Carton Transportation Vibration Test Table/ Vibrating
Table drop test equipement
is based on the United States and European transport standards, and
with reference to the United States of similar equipment to improve
manufacturing. The use of eccentric bearings in rotating elliptical
trajectories generated to simulate a car or ship the goods during
transport the vibration of the collision. Test platform will be
fixed on the eccentric bearing, when the eccentric bearing
rotation, the test platform for the entire plane would produce an
oval-shaped upper and lower front and rear movement, adjust the
eccentric shaft with the rotation speed is equivalent to adjust the
speed of motor vehicles or vessels.
Usage-- Vibrating table
Package Transport Vibration Stability Tester is according to the United States and the European transport
standards, and reference to the similar equipment improvement. Using eccentric bearing in rotating elliptical trajectory to
simulate the vehicle or ship goods produced in the process of
transportation vibration and impact.
Will test platform is fixed on the eccentric bearing, when
eccentric bearing rotation, the test platform of the
whole plane will produce elliptic fluctuation before and after exercise, adjustment
with eccentric shaft rotation
speed is equal to the speed of car or ship.
1. Digital instrument display vibration frequency;
2. synchronous belt transmission mute, very low noise;
3. test items using clamping rail type, easy to operate, safe;
4. machine using heavy-duty channel steel base with anti-vibration
pad, easy installation, smooth operation, without Install ground
5. DC motor speed control, running smoothly, load capability;
6. rotary vibration (commonly known as Valley-type).
To meet the criteria:
This transportation simulator vibration machine meets the following
standards: GB / T 4857.7-92 "transport package fixed-frequency
sinusoidal vibration test method"
The country road transportation simulator vibration simulator
applies to toys, electronics, furniture, gifts, ceramics, packaging
and other products packaged to simulate the transport tests, in
line with the United States and European transport standards.
|Vibration method||reciprocation type|
|Vibration amplitude||1 inch(25.4mm) +15%, to agree with ISTA/EN71 transportation
|Effective test area||1000×1200mm|
|Speed accuracy||≤ ±3RPM|
|Time setting range||0~99.99hour|
|Power||220V 50Hz single phase|