Ningbo haijiang machinery manufacturing co.,Ltd |
Verified Suppliers
|
|
1. The air inlet filter should be cleaned frequently. When the
filter is blocked, the air inlet volume decreases, which will
affect the drying effect.
2. In the drying process, powder material falls into hoppers and
heating drums and accumulates over a long period of time, so it
needs to be removed regularly (especially for long-term
non-changing and non-changing dryers).
3. If the temperature is too high, when the raw materials are caked
on the shield, the raw materials can not fall. At this time, it is
strictly forbidden to scrape with iron bars and other hard objects
to protect the screen hole separator from damage. The barrel should
be decomposed first and properly disposed of.
4. Turn off the fan 10 minutes after closing the electric heating
to ensure that the electric heater is fully cooled and its service
life is prolonged.
5. During the drying process, the working condition of the dryer
must be inspected regularly. If there is any abnormality, the dryer
should be stopped and repaired immediately, and then opened for use
after troubleshooting.