|
Trade Verify
Address: Next to the Baozhan road, Yinzhou District, Ningbo (Tong Industrial Zone) china
Contact name:Michael
Ningbo haijiang machinery manufacturing co.,Ltd |
|
Verified Suppliers
|
|
|
Thermoplastic energy injection molding machine clamping tonnage 530
KN Toggle stroke 745mm
The Characteristic Of HAIJIA Special Machine
1. High energy savings
Under normal operating conditions, compared with conventional
hydraulic injection molding machines, energy savings of 20-80%
can be achieved.
2. Molding stability
Compared with conventional injection molding machines repeatability
is greatly improved due to servo motor closed-loop control.
3. Quick response
Featuring a dynamic servo motor with a response time of only
0.05sec
4. Quiet operation
The machine runs at much lower noise levels, particularly in low
speed applications.
5. Reliable holding pressure
Compared with traditional hydraulic machine the holding pressure is
more stable and does not have limitation.
| Injection Unit | A B |
| Screw Diameter mm | 80 85 |
| Screw L/D Ratio L/D | 21 20 |
| Shot Size (Theoretical) cm3 | 1965 2218 |
| Injection Weight (PS) g | 1788 2018 |
| Injection Rate g/s | 442 499 |
| Injection Pressure Mpa | 168 148 |
| Screw Speed rpm | 0~130 |
| Clamping Unit | |
| Clamp Tonnage KN | 5300KN |
| Toggle Stroke mm | 770 |
| Space Between Tie Bars mm | 820*800 |
| Max.Mold Height mm | 810 |
| Min.Mold Height mm | 330 |
| Ejector Stroke mm | 240 |
| Ejector Tonnage KN | 150 |
| Others | |
| Max.Pump Pressure Mpa | 16 |
| Pump Motor Power KW | 45 |
| Heat Power KW | 31.4 |
| Machine Dimension m | 8.4*1.92*2.76 |
| Machine Weight t | 20 |
hydraulic injection molding machine,hydraulic components of eurpean
and american brands with different circuit design ensure locking
fast,low nosie,shortent the molding cycle,improve production
efficiency
