Twin cylinder plastic lnjection injection molding machine between
tie bars 980mm*950mm Max.Mold Height 960mm
The Characteristic Of HAIJIA Special Machine
Characteristic
The machine use the high-performance servo dynamic control system,
the oil pump as the power source, having the characteristics as
follow: high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
High Energy saving
Under the ideal working state, Power consumption is 40% less than
that of variable displacement pump and 70% less than that of fixed
displacement pump, save the cost effectively.
The machine use the high-performance servo dynamic control
system,the oil pump as the power source,having the characteristics
as follow:high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
HJF780 High quality hydraulic injection Molding MachineInjection Unit
|
A
B |
Screw Diameter mm |
95
105 |
Screw L/D Ratio L/D |
22
19.9 |
Shot Size (Theoretical) cm3 |
3188
3894 |
Injection Weight (PS) g |
2901
3543 |
Injection Rate g/s |
640
781 |
Injection Pressure Mpa |
175
143 |
Screw Speed rpm |
115 |
Clamping Unit
| |
Clamp Tonnage
KN |
7800KN |
Toggle Stroke
mm |
950 |
Space Between Tie Bars mm |
980*950 |
Max.Mold Height
mm |
960 |
Min.Mold Height
mm |
400 |
Ejector Stroke
mm |
280 |
Ejector Tonnage
KN |
186 |
Others
| |
Max.Pump Pressure
Mpa |
16 |
Pump Motor Power
KW |
37+30 |
Heat Power
KW |
56.7 |
Machine Dimension
m |
11.43*2.4*3.14 |
Machine Weight
t |
37 |
hydraulic injection molding machine,hydraulic components of eurpean
and american brands with different circuit design ensure locking
fast,low nosie,shortent the molding cycle,improve production
efficiency