|
Trade Verify
Address: Next to the Baozhan road, Yinzhou District, Ningbo (Tong Industrial Zone) china
Contact name:Michael
Ningbo haijiang machinery manufacturing co.,Ltd |
|
Verified Suppliers
|
|
|
Vertical injection molding machine Nitride and NIP/ Nitroflon
coated screws and barrels
1. The Characteristic Of HAIJIA Special Machine
Features of Vertical Plastic Injection Moulding Machine for
Injection Machinery
1. Vertical direct hydraulic clamping system is designed for
accurate, safe operation, especially suitable for insert
molding.With double slide table or rotary design, put in, take out
products and molding finish at the same time, which is more safe
and efficient for production , then reduce the cost of production.
2. High precision mold platen ( Parralelism/ flatness :
0.01/100mm), heavy-duty tie-bars, and low-pressure mold clamping
work together to greatly extend machine & mold life.
3. Nitride and NIP/ Nitroflon coated screws and barrels are
longlasting, robust and provide superior acid/alkaline
resistance.Heavyduty double cylinder injection unit is maintenance
friendly and free of oil leaks.
4. All series adapted Variable pump +PQ valves enable energy
savings of 30~50%.
5. Proportional hydraulic control system provides low noise, low
energy consumption, and smooth machine movements with durable life.
| Injection Unit | A B |
| Screw Diameter mm | 22 25 |
| Screw L/D Ratio L/D | 21 20 |
| Shot Size (Theoretical) cm3 | 38 49 |
| Injection Weight (PS) g | 35 45 |
| Injection Rate g/s | 23 30 |
| Injection Pressure kg/cm2 | 1418 1098 |
| Screw Speed rpm | |
| Clamping Unit | |
| Clamp Tonnage KN | 150S |
| Toggle Stroke mm | 160 |
| Space Between Tie Bars mm | 320*180 |
| Max.Mold Height mm | 160 |
| Min.Mold Height mm | 100 |
| Ejector Stroke mm | 240 |
| Ejector Tonnage KN | 150 |
| Others | |
| Max.Pump Pressure Mpa | 16 |
| Pump Motor Power KW | 4 |
| Heat Power KW | 2 |
| Machine Dimension m | 1.*0.85*1.9 |
| Machine Weight t | 0.7 |
Vertical injection molding machine,hydraulic components of eurpean
and american brands with different circuit design ensure locking
fast,low nosie,shortent the molding cycle,improve production
efficiency
