|
Trade Verify
Address: Next to the Baozhan road, Yinzhou District, Ningbo (Tong Industrial Zone) china
Contact name:Michael
Ningbo haijiang machinery manufacturing co.,Ltd |
|
Verified Suppliers
|
|
|
Horizontal two color injection molding machine injection pressure
275 Mpa screw speed 0~180
The Characteristic Of HAIJIA Special Machine
The Hydraulic Units
High efficiency, Energy-saving and high precise proportional
pressure and flow variable displacement pump system make the out of
the hydraulic system matching the required power for entire machine
operation without loss of high pressure throttle and overflow
energy. As comparedwith constant displacement pump, it saves power
by 30%~60%. A motor with same power may be fitted with an oil pump
of bigger displacement and thus accelerates the speed of
machine.Besides, the low oil temperature will prolong the service
life of sealing elements.
Buffer device is used in every mold opening and clamping oil way to
ensure steady mold opening and clamping operation without any
impact.Besides, differential mold clamping operation is fitted to
ensure high production efficiency.
| Injection Unit | A B |
| Screw Diameter mm | 65 70 |
| Screw L/D Ratio L/D | 21.2 19.4 |
| Shot Size (Theoretical) cm3 | 1128 1306 |
| Injection Weight (PS) g | 1026 1180 |
| Injection Rate g/s | 275 328 |
| Injection Pressure Mpa | 183 160 |
| Screw Speed rpm | 0~180 |
| Clamping Unit | |
| Clamp Tonnage KN | 3600KN |
| Toggle Stroke mm | 700 |
| Space Between Tie Bars mm | 680*680 |
| Max.Mold Height mm | 670 |
| Min.Mold Height mm | 240 |
| Ejector Stroke mm | 160 |
| Ejector Tonnage KN | 62 |
| Others | |
| Max.Pump Pressure Mpa | 16 |
| Pump Motor Power KW | 37 |
| Heat Power KW | 17.25 |
| Machine Dimension m | 6.3*1.9*2.4 |
| Machine Weight t | 12 |
hydraulic injection molding machine,hydraulic components of eurpean
and american brands with different circuit design ensure locking
fast,low nosie,shortent the molding cycle,improve production
efficiency
