Home Companies Tianjin Empire International trade Co.,Ltd.

HYDRAULIC HOSE STEEL WIRE BRAIDED HIGH PRESSURE CHINA MANUFACTURER

Active Member

Contact Us

[China]

Address: Room 1401 Building 1 Huadingzhidi Xiqing Zone, Tianjin, China

Contact name:Haman

Tianjin Empire International trade Co.,Ltd.

HYDRAULIC HOSE STEEL WIRE BRAIDED HIGH PRESSURE CHINA MANUFACTURER

Country/Region china
City & Province tianjin tianjin
Categories Hair Removal Product

Product Details

     

                          

             STEEL WIRE BRAIDED HOSE FLEXIBLE AGRICULTURE INDUSTRIAL                                               MINING BIG DIAMETER

 

 

Product Description

 

Markets:

• Construction
• Grounds & Building Maintenance
• Oil Field Service
• Material Handling
• Mining

Features/Benefits:
• Working pressure of 2500-4000 PSI in different sizes
• Half SAE bend radius for ease of installation and low force to flex
• Delivers superior performance in extreme cold conditions
• Meets ISO 3862-1 Type R12 / SAE J517 100R12 / EN 856 Type R12 specifications

Applications:
• Snow grooming equipment
• Heavy construction equipment
• Sidebooms

Compatible Fittings:
• 43 series fittings (for -6 through -20)
• 71 series fittings (for -24 only)

 

INDUSTRY STANDARDS

ISO 3862-1 Type R12 / SAE J517 100R12 / EN 856 Type R12

HOSE I.D. (INCH)

3/8 to 1-1/2

HOSE I.D. (MM)

10 to 38

HOSE I.D. (DN)

10 to 38

HOSE O.D. (INCH)

0.78 to 2.06

HOSE O.D. (MM)

19,8 to 52,5

MAXIMUM WORKING PRESSURE (PSI)

Up to 4000

MAXIMUM WORKING PRESSURE (MPA)

Up to 28,0

MINIMUM BEND RADIUS (INCH)

2-1/2 to 10

MINIMUM BEND RADIUS (MM)

65 to 250

MINIMUM BEND RADIUS (MM)

65 to 250

WEIGHT (LBS/FT)

0.40 to 2.01

WEIGHT (KG/M)

0,60 to 2,99

COMPATIBLE FITTINGS

43 or 71 Series

HOSE INNER TUBE MATERIAL

Nitrile synthetic rubber

MATERIAL - HOSE REINFORCEMENT

Four spiral steel wire

HOSE COVER MATERIAL

Synthetic rubber

MINIMUM WORKING TEMPERATURE (F)

-70

MINIMUM WORKING TEMPERATURE (C)

-57

 

MAXIMUM WORKING TEMPERATURE (F)

212

 

MAXIMUM WORKING TEMPERATURE (C)

100

 

APPLICATION

Snow grooming equipment, heavy construction equipment, sidebooms

  

                                                                            

             

              HYDRAULIC HOSE STEEL WIRE BRAIDED HIGH PRESSURE CHINA                                                                             MANUFACTURER

 

 

                                                        

                                                           WEARABLE COVER

                                                       

 

 

 

                                                                 HOSE RELL

 

 

 

                                                           HOSE MACHINE

                                                                                                   

 

Packing & Delivery

 

 

 

 
 
Our Company
 
 
 
Our Company
 

 

                                       Tianjin Empire International Trade Co.,Ltd

 

We, Empire International Trade Co.,Ltd, have more than 30 years experience of manufacturing rubber hose and hose assembly. We focus on providing our customer with products of high quality and competitive price and considerate service. Our factory has a land coverage of 136,000 m2 , floor area of 76,218 m2 and 1,260 employees at various position, including 16 internationally senior engineers and 57 technician. A production line with annual rubber hose production of 10 million nominal meters and 320 sets of manufacturing and processing machine as well as advanced testing devices, which make us one of the top ten largest rubber hose manufacturers. Also, we are a directing member to China Rubber Industry Association Rubber Hose and Rubber Tape Branch; a designated manufacturer and first-tier supplier of CNPC, SINOPEC, CNOOC and China Coal. Empire is looking forward to cooperate with customers worldwide.

 

Certifications

 

 

 

Inspection

 

                                   Every Hose Must Be Inspected Carefully

 

 

 

Working Pressure

The fluid system pressure including surge pressure should not exceed the rated working pressure of the hose-usually one fourth of the hose maximum bursting pressure.

Minimum Burst Pressure

Burst pressure are reference value during in-hose destructive tests, which are used to determine the strength of the hose and to establish design safety factors.

Pressure Surges

Almost all fluid systems develop pressure surges which may exceed relief value settings. Exposing the hose to surge pressure above the rated working pressure will shorten hose life and must be considered in selecting the proper hose. A surge which may not be indicated on many commonly used pressure gauges, can be measured using specialized electronic equipment. The safety factor in systems where severe pressure surges occur can be increased by selecting the hose with a higher rated working pressure.

Temperature

Hose should not be exposed to internal or external temperatures exceeding the resommended limits, as high heat conditions can cause and adverse effect on the hose by degrading the Elastomer and reducing the fitting retention. Continuous use at near maximum temperatures can also cause hose damage whilst continuous use at maximum temeperatures together with maximum pressure should be avoided.

Fluid Compatibility

The hose assembly (tube, cover, reinforcement and coupling) must be fluid compatible.

Hose Size

The hose size must be capable of handling the required flow volume. Using the smaller than required diameter of hose for a given volume of flow would result in excessive fluid turbulence, pressuredrop, heat generation and tube damage.

Hose Length and Routing

Select the correct length of hose taking into account vibrations, flexing and hose assembly routing. Use Clamp, bends, adapters, protective sleeves to protect and guide hose to minimize risk of damage wherever required to prevent excessive flexing, pulling, kinking, whipping, and contact to corrosives.

Minimum Bend Radius

Do not bend or flex hose beyond the specified parameter as this would put excessive stress on the reinforcement and severly reduce the ability of the hose to withstand the pressure.


Hose Assembly Inspection

All hose assemblies in service should be frequently checked for leakage, kinking, corrosion, abrasion or any other signs of wear and damage. Any hose assembly worn or damaged must be removed from service and replaced immediately.


Environment

Hydraulic hoses are more resistant to certain degradation, eg., Ultravioletlight, Ozone and many hydraulic fluids. Nevertheless due regards must be given to the working environment and the selection of hose best suited to operating conditions.


Safety Protections

Improper selection, installation or maintance of hose may result in premature failures, property damage or bodily injury.

 
FAQ

Q1. Why to choose Empire International Trade Co,. Ltd?
With over 30 years' manufacturing experience, we have been one of the top ten rubber hose manufacturers.
Our factory has a production line with annual production of 10 million nominal meters and 320 sets of manufacturing and processing machine and advanced testing devices.


Q2. What's the advantages of your products?
Our products have been certified by API and ISO quality management system.
With high quality and competitive price, our products exported far to Middle east area,South Korea, Europe,South Africa and other countries and won a good reputation from our customers.


Q3. Can you produce product with my own brand?
Yes, we have been offering OEM services since the beginning of our factory was built, so we got rich experience in this service.

Q4. Can the products be repaired or replaced if they are found defective?
If the products were found defective as a result of production, we provide free repair, replacement and refunding for these products.

Q5. Do you have a special price and service for wholesale?

Yes, since we focus on supplying our rubber hose to wholesalers and distributors to develop our B2B business.We will provide the most competitive price and best service to our wholesale customers. And extra discounts will be given, if the order quantity is up to our company's standard.
 
 
Our Service

< Free samples and factory visit is warmly welcomed.

< Free technical supports in installation and debugging process.

< Free repair, replacement and refunding for all products found defective as a result of production.

< Our products in strictly accordance with terms and technical requirements in related contracts.

< Our products are sure to deliver on time to ensure satisfaction of our users.

< 24 hours services and any question related to our products and company will be replied in 1 hour.

RETRACTABLE GAS WELDING 1/4'' CUTTING HOSE Oxygen & Acetylene hose

 
Contact us:
 
 
 
 

 

Hot Products

FLEXIBLE SANDBLASTING HOSE HIGH PRESSURE RUBBER HOSE CONCRETE CONVEYING HOSE Product Description ...
HOSE CONCRETE CONVEYING HOSE RUBBER HOSE ABRASIVE MATERIALS HIGH PRESSURE Product Description ...
HOSE CONCRETE CONVEYING HOSE MARINE DRY AND WET CEMENT FLEXIBLE Product Description Markets: • ...
HOSE CONCRETE CONVEYING HOSE DRY AND WET CEMENT BIG DIAMETER HIGH PRESSURE Product Description ...
HOSE CONCRETE CONVEYING HOSE FLEXIBLE SANDBLASTING HOSE DRY AND WET CEMENT Product Description ...
HOSE CONCRETE CONVEYING HOSE HIGH PRESSURE DRY AND WET CEMENT Product Description Markets: • ...