Active Member
|
[China]
Address: Room 209, No.6 Weihua West Road,Shizhong District,Jinan,250000,Shandong,China
Contact name:sales
Jinan Wang Te Bei Equipment Co., Ltd. |
|
|
1. Introduction
→Used in tensile, compression, bending, shear tests for metals, nonmetals, composites at room temperature.
→ Used for plain round bars, ribbed steel bars, straight steel bars, metal plates, metal bars, wire ropes, casting, forging, bolt fasteners, metal tubes, scaffolding steel tubes, etc.
→ Used for pulling strength, peeling strength, bending strength, welding strength for various thin metals, fasteners, wire materials, fiber, elastomer, etc.
Test Standards
→GB/T228.1 Metallic materials-Tensile testing-Part1:Method of test at room temperature；(ISO 6892-1:MOD)
→ASTM E8M-04.Standard Test Methods for Tension Testing of Metallic Materials [Metric]
→BS EN10002-1 Metallic materials — Tensile testing —Part 1: Method of test at ambient temperature
→ASTM E9-89a.Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
→GB/T7314 Metallic materials-Compression testing at ambient temperature； →GB/T232 Metallic materials-Bend test；(ISO 7348:2005.MOD)
→GB/T10623 Metallic materials-Mechanical testing-Vocabulary(ISO 23718:MOD)
→GB1499.1 Steel for the reinforcement of concrete - Part 1: Hot rolled plain bars(ISO6935-1:NEQ)
→GB1499.2 Steel for the reinforcement of concrete-Part2: Hot rolled ribbed bars(ISO6935-2:NEQ)
→GB13788 Cold rolled ribbed steel wires and bars
→JGJ/T27-2014 Standard for test methods of welded joint of reinforcing steel bars
→GB/T244 Metallic materials-Tube-Bend test
→GB/T3091-2015 Welded steel pipes for low pressure liquid delivery
→GB/T3098.1-2010 Mechanical properties of fasteners-Bolts, screws
and studs
2. Technical Specifications
| WAW-300J/600J/1000J (6 columns) | ||||
| 1 | Max. load | 300kN | 600kN | 1000kN |
| 2 | Load accuracy | ≤±0.5 | ||
| 3 | Relative error of indicating value of load | ≤±0.5% | ||
| 4 | Measuring range of load | 1%～100%F.S | ||
| 5 | Load resolution | 1/300000F.S | ||
| 6 | Measuring range of deformation | 1%～100%F.S | ||
| 7 | Relative error of indicating value of deformation | Within ±0.5％ | ||
| 8 | Deformation resolution | 1/300000 of max. deformation | ||
| 9 | Loading speed | 0.02%-2% FS /s | ||
| 10 | Stress rate error | ≤±5% | ||
| 11 | Max. Moving speed of piston | ≈120mm/min | ≈100mm/min | ≈90mm/min |
| 12 | Max. moving speed of crosshead | ≈150mm/min | ≈125mm/min | ≈100mm/min |
| 13 | Tensile space | 700mm | 700mm | 700mm |
| 14 | Compression space | 650mm | 650mm | 650mm |
| 15 | Span between columns | 430mm | 510mm | 550mm |
| 16 | Clamping diameter of round specimen | Ф10～20mm; Ф20～32mm; | Ф10～18mm; Ф18～29mm; Ф29～40mm; | Ф15～30mm; Ф30～45mm; Ф45～55mm; |
| 17 | Clamping thickness of flat specimen | 2～16mm | 2～16mm;16～30mm | 2～20mm;20～40mm |
| 18 | Clamping width | 70mm | 90mm | 125mm |
| 19 | Size of pressure platen | Ф150mm,square 204*204 | ||
| 20 | Stroke of pistion | 250mm | ||
| 21 | Clamping mode of sample | Hydraulically clamping | ||
| 22 | Dimension of servo cabinet(L*W*H) | 1150x800x940mm | ||
| 23 | Working voltage | ～380V±10% 50Hz(firmly grounded) | ||
| 24 | Dimension of loading frame(L*W*H) | 850x600x2250mm | 920x750x2350mm | 1100x850x2600mm |
| 25 | Power | 3.8kW | 4.0kW | 6.0kW |
FAQ:
1. How to choose the most suitable testing machine?
Our professional team will give you the best suggestion as long as you tell us what kind of test you need
to do and the required specification.
2. What’s the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20
working days after deposit receipt. If you are in urgent need, we can consider making special
arrangement for you.
3. Do you accept customization service?
Yes, of course, we can not only offer standard machines, but also customized machines according to
your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.
4. Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to
arrange hotel and pick up you from airport.
5. Do you have customers of our country before?
Now our testing machines have been sold to more than 26 countries, like USA, Canada, Russia,UK,
Italy, Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand and Vietnam,
Iran, Brazil...and so on.
6. How about your warranty?
Generally, our warranty is one year. Within the warranty period, we can offer technique support and
part parts change, necessarily, our engineers may go to your place for better service.
7. How about the packing for machine, is it safely protected during transportation?
Our machine is packed by standard export wooden box, it won’t be damaged. We’ve delivered many
testing machines abroad by sea or by air without damage.
8. What is the order process?
Inquiry - quotation - communication - order confirming - deposit payment - production - testing and
debugging - balance payment - packing - delivery - customer receiving - after service.
9. How to install and use the product?
The product is shipped with an operating instructions.
