|
[China]
Trade Verify
Address: Flat B5 1/F., Manning Ind. Building, 116-118 How Ming Street, Kwun Tong, Kowloon, Hong Kong
Contact name:Tom Guo
STJK(HK) ELECTRONICS CO.,LIMITED |
|
Verified Suppliers
|
|
PRODUCT DESCRIPTION
The AD623 is an integrated, single- or dual-supply instrumentation amplifier that delivers rail-to-rail output swing using supply voltages from 2.7 V to 12 V.
The AD623 offers user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard pinout configuration. With no external resistor, the AD623 is configured for unity gain (G = 1), and with an external resistor, the AD623 can be programmed for gains of up to 1000.
The accuracy of the AD623 is the result of increasing ac common-mode rejection ratio (CMRR) coincident with increasing gain. Line noise harmonics are rejected due to constant CMRR up to 200 Hz.
The AD623 has a wide input common-mode range and amplifies signals with commonmode voltages as low as 150 mV below ground. The AD623 maintains optimal performance with dual and single polarity power supplies
PRODUCT PROPERTIES
Product Status | Active |
Amplifier Type | Instrumentation |
Number of Circuits | 1 |
Output Type | Rail-to-Rail |
Slew Rate | 0.3V/µs |
-3db Bandwidth | 800 kHz |
Current - Input Bias | 17 nA |
Voltage - Input Offset | 25 µV |
Current - Supply | 375µA |
Voltage - Supply Span (Min) | 2.7 V |
Voltage - Supply Span (Max) | 12 V |
Operating Temperature | -40°C ~ 85°C |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package | 8-SOIC |
Base Product Number | AD623 |
