ST9G-1.5KW / 380V , ST11G-1.5KW / 380v Cathode Ceramic Shaft Porcelain Electric Heater For Esp Controller

ST9G-1.5KW / 380V , ST11G-1.5KW / 380v Cathode Ceramic Shaft Porcelain Electric Heater For Esp Controller

Ash bucket electric heater is used inside ESP ash hopper, to prevent the ash hopper ash condensation and harden , in order to ash difficult . Its working principle is put metal wire resistance in to a metal pipe . and in the gap part tightly filled with good thermal conductivity and dielectric properties of magnesium oxide from. It can be bent into any desired form , Installed in the air channel, Used for heating the air , it can also be immersed in water or other liquid is used for heating water or other liquids , and placed directly on the solid metal heating metal , It has the advantages of simple structure, high thermal efficiency , good safety, durability and light, at present in our country has all kinds of industry equipment in use . Products fit to technical requirements of  TB/T2379-93.

Cathode ceramic shaft electric heater        

ash bucket electric heater        

insulator compartment electric heater 

Porcelain electric heater

Porcelain insulator electric heater

Casing tube electric heater

T4.1.9B,ST9G-1KW/220V ,ST9G-1.5KW/220V ,ST11G-1.5KW/220V
ST9G-1KW/380V,ST9G-1.5KW/380V ,ST11G-1.5KW/380V ,ST9G-1KW/415V ,ST9G-1.5KW/415V ,ST11G-1.5KW/220V,ST11G-1.5KW/380V ST11G-1.5KW/415V      

Model: FT11G/ST11G
Working voltage: 380V
Power: 0.5KW-10KW
Insulation resistance: 10M
Dielectric strength: 1000V
Unit: KW
Outline dimensions: 500X720X16
Temperature range: 0-450
Use: Heater
Weight: 10KG
Maximum heating weight: 8KG
Continuous service life: 100000H