Active Member
|
[China]
Address: CRANE INDUSTRAL PAPK CHANGYUAN
Contact name:Alisa
HENAN KONE CRANES CO.,LTD |
|
|
80T Truss Type Double Girder Gantry Crane
Introduction of 25 ton Factory use Cabin Control Double Girder Rail Mounted Goliath Crane
1.This gantry crane is widely used together with winch or trolley
for lifting device.
2. It is a medium and heavy size crane which travels in track.
3. Structure: main beam, support legs, crane traveling organ,
trolley, electric equipment, strong lifting winch
4. Power is supplied by cable or slide wire.
5. It is prohibited for lifting melt metal, flammable, explosive,
corrosion, overloading, dust and other dangerous operations.
Application 25 ton Factory use Cabin Control Double Girder Rail Mounted Goliath Crane
workshop, storage, port and hydroelectric power station and some other outdoor place, where it has a high frequency or more lifting times.
Product Paramenters
| No | Item | Data |
| 1 | Lift capacity | 5T |
| 2 | Span | 13.9M |
| 3 | Lift height | 3M |
| 4 | Total height | 4.5M |
| 5 | Work duty | A5 |
| 6 | Control method | Wireless remote |
| 7 | Electrical parts | Schneider |
| 8 | Lift motor | 6.1/1KW, lift speed 5/0.8M/Min |
| 9 | Cross travel motor | 0.5KW, travel speed 5/20M/Min |
| 10 | Long travel motor | 1.5KW X 2, travel speed 2/20M/Min |
| 11 | Main power cable | 3 X 10MM2 |
| 12 | Cable spring | JTT50-50-4 |
| 13 | Runway with accessories | P24 |
| 14 | Control voltage | AC 36V |
| 15 | Power supply | 480V/50Hz/3P |
| 16 | Key Word | Gantry Crane |
Project Story
We received the inquiry from this client on April 6, 2019. But at that time, they told us they were looking for overhead crane.
After checking the design drawing of their workshop, we found that it cost too much to add steel structures to support overhead crane. And on the other hand, it was not easy to meet customer’s requirement on lifting height by overhead crane. Finally we recommended gantry crane design with European type electric hoist.
Our client was moved by our design since we were considering saving cost from the perspective of customers but not focused on profit. They did not ask any discount for Proforma Invoice and paid the deposit on April 21, 2019. When the 5 tons single girder gantry crane arrived at client’s factory, they are very satisfied because we treated each package well.
They spoke highly of our professional service online though time between China and USA is quite different. On December 26, 2019, we got an email from our USA client. They wrote our gantry crane
are working perfectly and they are in the planning stages of their next building.
