Guide Rail Terminal Block Single Pole Of Combination Terminal Block FJ6/JTS2EB

Guide - rail connection terminal Block Connector single pole of combination terminal block FJ6/JTS2EB

General:

FJ6/JTS2EB series guide-rail connection terminal has the features of both fence-type series and guide-rail type series. With random combination of pole numbers, it is connected with the bolts and fixed with the locater, and then assembled at guide rail. This series of terminals is widely used in the industries such as power supply, industrial control, and frequency conversion, etc., with quite large current, reliable connection, nice appearance and so on. It is equipped with the accessories including the protective transparent cover, identification bar, baffle, locator, etc., What's more, it can realize one-inlet multi-outlet and multi-inlet multi-outlet connection function to meet the customers' demands.

This series of terminals is only uses the guide-rail installation.

Features:

FJ6/JTS2EB multi-purpose terminals are made up of conductive parts, insulation and protective cover. The product is small in volume and reliable in structure. The connection of the wire is connected with the tube connection mode, which saves the end (line nose) and saves the time of construction. The bottom of the screw is a special ball, which not only does not damage the wire, but also has enough pressure on the wire to make the contact more reliable. By type test, the voltage drop is only 1.6mV (IEC standard 3.2mV), and the temperature rise is 17K (IEC standard is 45K).

Installation Use:

Install it on TH - 35 rail (top-hat rail) .It is suggested that multi-core wire should be used for connecting conductors. And only the conductor is inserted into the bottom of blind hole thoroughly,could the screw be tightened down to prevent wrong connection.  When conductor section is small, and conductor insulator can be stuffed into the connection hole, the insulator is allowed to enter into the connection hole on the premise of reliable contact of conductor. When to assemble the protective cover,apply the pressure to four laps, and make sure every lap into the hole.Self locking function makes the connection way more convenient and firm.

Detailed information:

.