4×3×13 mission centrifugal sand pump is usually used as measuring
pump or replenishment pump Product introduction - Mission pump, a reliable, high power, low cost mud pump. Unique
concentric round shell and wide impeller design, so that the
centrifugal pump shows a wear resistance, long service life
characteristics, and the use of maintenance costs are very low.
Concentric circles are designed to reduce vibration and turbulence,
because they cause great wear when pumped into drilling fluids
containing solid solids. This design can also relieve high load and
shaft deviation of pump.
- The wide impeller design of the mission pump can reduce the speed
of the liquid from the blade, and the design of the narrow blade
will make the hard substance of the drilling fluid exert a great
impact on the blade, while the wide blade design will not happen.
- In addition, the MISSION pump is also equipped with a large load
shaft, larger than the average diameter of the pump, but also
extended the service life. You can even connect the shaft with the
belt directly to drive the centrifugal pump.
- The main material of MISSION pump is high hardness steel, stainless
steel and bronze. It can be driven by an electric motor, a diesel
engine or a hydraulic motor. We can provide the whole machine or
separate pump head and fittings to meet the needs of users
Features Mission universal control silica sand pump for mining and
construction, papermaking, textile, food, feed and other
industries; The mission of universal pump function: - Single stage single suction
- Haft open impeller
- Anti abrasive material, high chromium alloy (flow part)
- The impeller is adjustable with the protection plate.
- Marx density: 50-60 (by weight)
- Easy installation
- Efficient work
Pump Parameters
Model | Discharge Capacity | Head | Efficiency | Power | speed | Inlet Diameter | Outlet Diameter | Weight | Appearance Size,mm | 4×3×13 | 60~80m3/h | 22~28m | 0.65 | 11/15 kW | 1450/1750rpm | 4″ | 3″ | 435/450kg | 1531×495×674 1571×495×674 |
|