Home Companies Winner Ball Valves Co.,Ltd

24V 220V Universal Digital Room Thermostat 86mm86mm15mm For HVAC System

Active Member

Contact Us

[China]

Address: No.28 Lutian Road, Luvalley, Changsha National High-Tech-Industrial Development Zone,Hunan, China

Contact name:Leon Liang

Winner Ball Valves Co.,Ltd

24V 220V Universal Digital Room Thermostat 86mm86mm15mm For HVAC System

Country/Region	china
City & Province	changsha hunan
Categories	HVAC Systems & Parts

Product Details

1). Specification

Temperature setting range: 5~35℃

Temperature display range: 0~40℃

Fan speed: High, Medium, Low, Automatic

Temperature sensing: NTC Thermistor (10K)

Relative humidity: 90%RH

Environment temperature: -20-60℃

Power voltage:AC230V±10% 50/60Hz

(&AC115V,AC24V can be made)

Electrical parameters:AC250V 3A

Power: <1.5W

Protect range:IP30

Size:86mm×86mm×15mm

2). Standard configuration

A,Fan coil unit and motorized valve control;

B,8 hours automatic timer;

C,Fan coil unit wind speed conversion--. High, Medium, Low, Automatic;

D,Locking function --- When locked, the temperature can not be set, and only heat & cool transfer, power on & power off and Fan speed setting ;

E,Lock hidden function--- This function can only operate in the thermostat power off.

F,Shell pieces for the silver or white colors.

3). Function

Ⅲ. Function

86*86*15 Standard LCD Hotel Room Thermostat Controller Switch

Can adjust freely during 5℃～35℃,and display the indoor temperature. The indoor temperature can also displayed even thermostat in power-off condition;
18 hours automatic timer power on/off;
4 regular Fan speed adjustment mode
Can connected to 2 wire or 3 wire motorized valve (2 way or 3 way) or air damper;
Cooling, heating mode;
NTC Thermostat fault alarm;
Initial setup temperature(25℃) can be adjusted;
In the power off, press “Heat/Cool” key and then “∧” key within 1S, you can lock. press “Heat/Cool” key and “ ∨ ” key within 1S, you can unlock.
Optional function: 1) Power-down memory function, If power-on again after accidental power-down, it can save the last working state;
Optional function: 2) If the power is cut off by accident, the thermostat would be reset after recharge and return to the last working condition;
Optional function: 3) Only output for valve open, and no output for valve close. When press the power, the normal close contact closed to start other equipment.

Ⅳ. Instruction

“Power” －Click this key, the thermostat is on. When press again, it is off.

“∨”and“∧” －Temperature setting key. Press “∨” once,the setting temperature would reduce and press “∧” once,the setting temperature rise 1℃.

“M” －The key for cooling/heating/Air and timing. Press this key repeatedly, and it would transit from cooling/ heating/Air. Press this key 3s, then Timer, Press the “∨” “∧”to set the time. Press “∨” key set time to 0 if you want to cancel the set time.

Heating→ Cooling → Air

Press this key repeatedly and set auto,high, medium, low, auto condition. The fan state changes when press this key.

Auto→ high→ medium →low

When the power is off, press “M” key, and then press “∧”within 1S, it will setup to limit temperature of Heating.

When the power is off, press “M”key, and then press “∨”within 1S, it will setup to limit temperature of Cooling.

℃ and ℉ － When the power is off, press “M”key, and then press “Fan” within 1S, can be changed between ℃ and ℉.

5). Installation

1. If thermostat is matched with automotive ball valve, there need 7 wires: Live wire, neutral wire, valve open wire, valve off wire, and high, medium, low control for fan coil unit.

2.If it is matched with automotive ball valve, there need 6 wires: Live wire, neutral wire, valve open wire, and high, medium, low control for fan coil unit.

3. If only to control fan coil unit, there need 5 wires: Live wire, neutral wire, and high, medium, low control for fan coil unit.

4. We suggest to install the thermostat after the completion of the interior decoration.

Dimension and schematic

86*86*15 Standard LCD Hotel Room Thermostat Controller Switch

Ⅷ. Installation:

1. Install the thermostat on the indoor wall vertically. The distance to the ground is about 1.5m so as to make sure the thermostat can get sufficient air and fix the room temperature.

2. Make sure the thermostat be placed away from direct light, windows and doors and cooking equipment or other heat sources.