|
[China]
Trade Verify
Address: Building B-3, Liando U Valley, No. 780 Baoyuan Road, Chengyang High-tech District, Qingdao, China
Contact name:
Qingdao AIP Intelligent Instrument Co., Ltd |
|
Verified Suppliers
|
|
|
Rotor Testing Machine For Motor
1. Introduction
2. Technical specification
Test object | The conduct bar of rotor |
Test items | conducting bar, broken bar, thin bar |
Display mode | LCD 19” display |
Parameter save | Software save |
Test mode | Single step mode: when the test is over, the machine output the result, the motor continues to work to acquire waveforms until press the reset button, and the machine stop test. Continuous mode: after test, the machine output the result while the machine stop test automatically |
Control mode | Manual/ auto |
Dimension range | Outer diameter:20-100mm Inner diameter:4-29mm Lamination height :100mm(max)
|
Working ambient | Temperature 0~40℃,humidity≤90％RH |
3. Configuration list
No. | Product | Specification | Unit | Qty |
1 | Master unit | Data acquisition | set | 1 |
2 | Control cabinet | With fixed foot wheel | set | 1 |
3 | Special fixture | Customized | set | 1 |
4 | IPC | IPC+19” LCD +keyboard +mouse | set | 1 |
5 | Test software | Interface + help document | set | 1 |
6 | Test bench | Customized | set | 1 |
7 | Sensor | Professional test sensor | set | 1 |
8 | Adjusting device | Adjusting sensor position | set | 1 |
4. Method of avoiding bar broken
4.1 Check carefully before casting, to avoid the slot deviation and block.
4.2 Control the pressed force when the laminating the iron core. Continue the next step after casting aluminum until the aluminum liquid is solidified.
4.3 Improve the iron core preheating temperature properly.
4.4 Do not stop in the process of casting.
5. Reference picture of normal rotor testing machine for the broken bar
