|
[China]
Trade Verify
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Contact name:Penny Peng
Pego Electronics (Yi Chun) Company Limited |
|
Verified Suppliers
|
|
|
Plastic Izod Pendulum Impact Tester 2.75J 5.5J 11J and 22J Conforms to ISO180
1. Introduction
The digital charpy impact test machine can meet the requirement of ISO179, the test result can be printed out directly with micro-thermal printer, the test parameter can preset by LCD touch screen.
2. Application
Non-metallic materials such as hard plastic, reinforced nylon, glass reinforced plastic, ceramic, cast stone and electrical insulating materials
3. Features
1). High-precision intelligent controller with LCD display for intuitive and accurate data reading
2). Adopts carbon fiber pendulum rod, the impact mass is concentrated on the centroid of the pendulum hammer, truly vibration-free impact test, and increase the service life.
3). Adpots high-resolution digital encoder, the angle test accuracy is higher and more stable
4). Aerodynamically compliant impact hammer and imported ball bearing, greatly reducing friction loss caused by machinery
5). Automatically calculate the final result, can save 12 groups data and get the average value.
6). English operation interface, test results can choose J/m, KJ/m2, kg-cm/cm, ft-ib/in and other units
7). Built-in micro printer print test report
4. Specifcation:
| PG-CTSH-1 | PG-CTSH-2 | PG-CTSH-3 | ||
| Display | LCD touch screen (built-in micro-printer) | |||
| Units | J/m,KJ/m2., kg-cm/cm,ft-ib/in | |||
| Angle accuracy | 0.010 | |||
| Impact energy accuracy | 0.01J | |||
| Impact speed | 2.9m/s | 3.8m/s | ||
| Distance between center of hammer to center of sample | 230mm, 395mm | |||
| Pre-elevation | 150° | |||
| Jaw support spacing | 40mm, 60mm, 70mm, 95mm | |||
| Support blade corner radius | R=1mm | |||
| Impact edge included angle | 30° | |||
| Impact edge corner radius | R=2mm±0.5mm | |||
| Impact energy | 1J,2J, 4J, 5J | 7.5J,15J | 25J,50J | |
| Working power | AC220V±10%, 50HZ | |||
| Weight | 85kg | |||
5. Configuration List:
| Type | Name | number | unit |
| Mainframe | Impact test equipment | 1 | set |
| Accessories | toolbox | 1 | set |
| 1J impact pendulum hammer | 1 | set | |
| 2.75J impact weights | 1 | pair | |
| 5.5J impact weights | 1 | pair | |
| 11J impact weights | 1 | pair | |
| 22J impact weights | 1 | pair | |
| Sample clamp | 1 | suit | |
| socket head wrench | 1 | suit | |
| Printer (buit-in the equipemnt) | 1 | set | |
| Spare paper roll | 2 | roll |
6. FAQ
1). What is the warranty period of the equipment?
Answer: the equipment warranty is 12 months upon you receipt of the
equipment
2). Can you provide third-lab calibration certificate?
Answer: Yes, the equipment can send to the third-labs authorized by
ISO17025 and get the calibration certificate, but the buyer should
undertake the charges.
3). Does this equipment has English operation interface?
Answer: of course, yes, the operation interface has English
instruction.
4). Your power plug can not be used in our country, can you change
it for us?
Answer: yes, we will change the power plug to fit your demands,
please subbmit this issue when you make order.
