Home Companies Pego Electronics (Yi Chun) Company Limited

100KHz/0.5μs Ring Wave Generator 16A CDN for Simulating Oscillatory Transient LCD Touch Screen

Pego Electronics (Yi Chun) Company Limited

Contact Us

[China] country

Trade Verify

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Contact name:Penny Peng

Inquir Now

Pego Electronics (Yi Chun) Company Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

100KHz/0.5μs Ring Wave Generator 16A CDN for Simulating Oscillatory Transient LCD Touch Screen

Country/Region china
City & Province yichun jiangxi
Categories Bathroom Sinks
InquireNow

Product Details

IEC61000-4-11 EMC Test Equipment 100KHz PLC Touch Screen Ring Wave Generator

 

1. Introduction of Ring Wave Generator

Ring wave generator is completely meet the requirements of IEC61000-4-12, GB/T17626.12 and ANSIC62.41/45. The ring wave is a typical oscillatory transient, induced in low-voltage cables due to the switching of electrical networks and reactive loads, faults and insulation breakdown of power supply circuits or lightning. The ring wave has 0.5μs rise time and 100KHz oscillation frequency.

 

2. Parameters of Ring Wave Generator

ModelRWG-4K16RWG-6K20
Open Circuit voltage Oscillation frequency (1/T)100kHz±10%
Open circuit Output voltage (PK1)(250V~4000V)±10%(250V~6000V)±10%
Open Circuit Voltage rising time (T1,10%~90%)0.5μs±30%
Short Circuit Current rising time (T2,10%~90%):≤1μs
Decaying (open circuit voltage)

40%<(PK2) to (PK1)<110%

40%<(PK3) to (PK2)<80%

40%<(PK4) to (PK3)<80%

PolarityPositive, negative, positive/negative auto
Output Impedance12Ω, 30Ω
Phase injection methodasynchronous, synchronous (0-3600) or specific angle
Coupling and decoupling network(CDN)16A single Phase20A 3phases/5wires
Weight44x45x35cm44x45x30cm
44x45x35cm (CDN)
Working PowerAC 220V single phase, 50Hz/60Hz

 

3. Features of Ring Wave Generator

● Equip with 7 inch LCD touch screen.

● Built-in 16A single phase coupling and decoupling network (CDN).

● Equip with EUT output socket-outlet, easy to connect with EUT.

● Built-in EUT working voltage and current monitoring, has over-voltage and over-current protection.

● Intelligent program-controlled high-voltage power supply with built-in high-voltage overvoltage, overcurrent and short circuit protection.

● Ring wave output intelligent detection, voltage error, no output warning.

● With self-diagnosis function, intelligently judge the abnormal output of high voltage and ring wave

 

4. Picture:

 

 

Hot Products

IEC60695-2-10 Glow Wire Tester with 1mm K type Thermocouple and 4mm Nickle Glow Wire 1.Description: ...
IEC60695-11-5 Needle Flame Tester with ISO17025 authorized Third-lab Calibration Certificate 1. ...
IEC60112 Stainless Steel Tracking Index Test Apparatus applied to CTI and PTI Test 1. Introduction ...
Temperature Rise Black Test Corner with 136 measurement Points (IEC60335-1 / Clause 11) 1. ...
AC and DC Dielectric Withstand Tester 5KV / 10KV / 20KV / 50KV with CE Certificatet Introduction: ...
IEC60950 IEC60335-1 Scratch Tester with Hardened Steel Pin for Accessible Parts 1. Introduction ...