Active Member
|
[China]
Address: NINGBO XIANGSHAN INDUSTRIAL AREA
Contact name:Cathy
Ningbo Lingkai Electric Power Equipment Co., Ltd. |
|
|
Manual Hydraulic Cable Lug Crimping Tool EP-430 12T Crimping Up To 400㎡
Features
Manual hydraulic cable lug crimping tool
1. The compression pliers are designed for hydraulic crimping on
power cable and wire. The crimped conductor is tested in high
conductivity and close contact so that it's uneasy to break out and
turn hot .
2. Open cut design for convenient operation.
3. Dies are quickly put on tube by double speed unit. Then
compression force lift and automatically change to low speed. The
operation finishes with energy saving and time shorten.
4. The head could be rotated 180° freely for narrow space working.
5. Fitted with safety valve, when pressure reaches to limited max.
Value pressure release automatically to prevent over pressure.
6. Standard die assembling 50,70,95,120,150,185,240,300,400mm².
7. Fiberglass insulated handles to prevent accidental
electrichitting.
8. Packing case is made form robust integarl plastic box.
Technical Data Manual Hydraulic Cable Lug Crimping Tool EP-430 12T Crimping Up To 400㎡
Model | Crimping force(T) | Crimping range(mm²) | Stroke (mm) | Oil capacity (cc) | Weight(kg) | Standard dies(mm) | Packaging Size(mm) |
| EP-400 | 12 | 16-300 | 30 | 145 | 6.6 | 50,70,95,120,150,185,240,300 | 755×130×230 |
| EP-430 | 12 | 16-400 | 32 | 145 | 6.4 | 50,70,95,120,150,185,240,300,400 | 755×130×230 |
| EP-510 | 12 | 16-400 | 38 | 200 | 7.2 | 50,70,95,120,150,185,240,300,400 | 755×130×23 |
Characteristics
Manual Hydraulic Cable Lug Crimping Tool EP-430 12T Crimping Up To 400㎡
1. Compression mould can be replaced,easy operation.
2. Accessories:50,70,95,120,150,185,240,300,400mm2.
3. Press tools is suitable for DIN,AWG,JIS
4. There is a safety protection device of "Kacha"voice when it reaches to the high voltage or low voltage.
5. It can be used in working in the higher levels by one person.It saves time and labor.
6. Pump is connected to the tools,the head of die-casting can be turned 180 degree.
