Active Member
|
[China]
Address: N0.506 Huicheng Road, Chengyang District, Qingdao City，China
Contact name:Jack
Qingdao Hengfengyou Electrical Engineering Co., Ltd. |
|
|
low voltage draw out type power distribution GCK switchgear
Features
GCK low-voltage withdrawable switchgear is widely used in power generation plants, substations, power
distribution centers PC and motor control center MCC of factory and mining enterprises and high-rise
buildings, as a low-voltage complete power distribution device for AC 50-60Hz, rated working voltage of
660V and below, rated current of 4000A and below, power distribution, motor centralized control, reactive
power compensation.In the three-phase three-wire or three-phase four-wire system, it is used as a substation
, feed or motor for low-voltage distribution systems. GCK low-voltage withdrawable switchgear has increased
its capacity and mechanical strength on the basis of maintaining higher electrical performance than similar
products, and has characteristics of advanced structure, beautiful appearance, high protection level, safety
and reliability, and easy maintenance; can be the update product of low voltage switchgear device.
| Rated Insulated Voltage | AC660V , AV1000V |
| Rated Working Voltage | AC380V , AC660V |
| Rated Frequency | 50Hz |
| Horizontal busbar rated current | 1250-4000A |
| Vertical busbar rated current | 1000A |
| Feeder circuit maximum current | 2500A |
| Drawer circuit Maximum current | 630A |
| Control motor maximum capacity | 320KW |
Horizontal busbar peak withstand current(0.1 S) |
63KA,105KA,176KA |
Horizontal busbar peak withstand current(1 S) |
30KA,50KA,80KA,100KA |
Vertical busbar peak withstand current(0.1 S) |
63KA,105KA |
Vertical busbar peak withstand current(1 S) |
30KA,50KA |
| Rated working frequency withstand voltage(1 min) | 2500A |
Secondary frequency withstand voltage(1 min) |
2500A |
Dimension size ( width*deep*height) mm |
600(800/1000)*800(1000)*2200 |
KYN28-12 armored metal-enclosed switchgear (hereinafter referred to as KYN28-12 switchgear) is suitable for three-phase AC 50Hz (60Hz), 7.2~12kV single busbar and single busbar segmented power system, with "five-proof" function. The removable part of the switchgear can be equipped with components such as vacuum circuit breakers and vacuum contactors.
KYN28-12 switchgear meets IEC298, GB3906, DL404 and other standards.
The degree of protection of the switchgear cabinet is IP4X. When the breaker door is opened and the handcart is removed, the degree of protection is IP2X.
All relevant IEC specifications and national or local safety guidelines are to be observed during installation and operation of the system.
