Easy Installation Wall Mount Metal Enclosure With Adjustable Depth Inner Door

Application
 
 

• The design iof s characterized by a sturdy cruciform body, folded from a cold pressed sheet steel plate.The enclosure’s edge is folded in the shape of a channel to avoid water stagnating on the seal.
• The assembly of the enclosures and accessories is easily done and will help you to reduce assembly time and remain competitive.
   

 
Standards
 

• Maximum protection for the user and the equipment
  is achieved thanks to the high protection degrees
  IP 55 and 66 according to IEC 60529, and IK 10
  according to IEC 62262

Construction
 

• Formed 1.2mm or 1.5mm steel.
• Smooth, continuously welded seams ground smooth.
• Door opening angle: 120° of outer door,90° of inner door
• Door stiffeners are provided where required for increased strength and rigidity 
• Formed lip on enclosure to exclude flowing liquids and contaminants.
• Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
• Doors may be easily removed for modifications and are interchangeable.
• Seamless poured-in place gasket.
• Collar studs provided for mounting plate
• Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
• Bonding stud provided on door and grounding stud installed in enclosure.
• turn latch and multi-point handle (key lockable) are zinc diecast with epoxy finish.

Supply include:
 

• Enclosure and outer door,inner door,mounting plate,lock system,gland plate,sealing gasket and accessories

Dimension(mm):