95kW Induction Welding Machine , High Frequency Induction Heater Small Size

High Frequency Induction Heating Equipment Small And Medium Heat Treatment Equipment For Welding And Smelting

Working principle of high frequency induction heating equipment:

High frequency large current flows to heating coils (usually made of copper tubes) that are wound into rings or other shapes. Thus, a strong magnetic beam with instantaneous polarity change is generated in the coil. When the heated object such as metal is placed in the coil, the magnetic beam will penetrate the whole heated object, and a corresponding large eddy current will be generated in the direction opposite to the heating current inside the heated object. Due to the resistance in the heated object, a lot of Joule heat will be generated, and the temperature of the object itself will rise rapidly. To achieve the purpose of heating all metal materials.

Technical parameters of high frequency induction heating equipment:

Model: LC-GPGY-95KW

Maximum input current: 95A

Input power: 95kW

Oscillation frequency: 24khz

Input voltage: 353v

Host volume: 471mm×371mm×671mm

Cooling water pressure: 0.1-0.3mpa

Cooling water flow (main engine): 15L / min (0.1MPa)

Cooling water flow (transformer): 18L / min (0.1MPa)

Water temperature protection point: 50 ℃

Host weight: 40 ± 5% kg

Efficiency: 90%

Application fields of high frequency induction heating equipment:

1. Various hardware tools and hand tools. Such as the quenching of pliers, wrench, hammer, axe, screwdriver and scissors (gardening scissors);

2. Various automobile and motorcycle accessories. Such as quenching of crankshaft, connecting rod, piston pin, sprocket, aluminum wheel, valve, rocker shaft, transmission half shaft, small shaft, and fork;

3. Various electric tools. Such as gears and shafts;

4. Machine tool industry. Such as quenching of machine tool surface and machine tool guide rail;

5. Various hardware and metal parts, machining parts. Such as quenching of shafts, gears (sprockets), cams, chucks, clamps, etc;

6. Hardware mold industry. Such as quenching of small molds, mold accessories, mold inner holes, etc;