|
Trade Verify
Address: The 51 QingYang road in wuxi city, jiangsu province
Contact name:
Trustworthiness ＆ Gold Group CO,.Ltd |
|
Verified Suppliers
|
|
|
1)Description of products
Standard mounting dimensions
Relationship for speed&load/current&load
2)Optional Specifications
This product contains two specifications, LA-3A and LA-3B.The
difference between A Type and B Type only is protection grade.
Type A shell after nickel plated protection grade reaches IP65/66,
type B for going through any treatment for protection grade IP54.
Type A type more beautiful than B
Type A, type B can be installed relay won't install relays
Type A can be used in outdoor , type B can not be used for the outdoors
3)Optional connection terminal
Back-end connection
Front connection F1 Front connection F2 Front connection F3
4)Optional wiring and control
Picture | Wiring | Description | Overall |
Bare two lines | Leaving only the two electrical wire connected control switch and power |
| |
Bent connection | Motor connected to the controller, the controller is connected with the handset | Connect with CB-1 | |
| Double connection | Motor connected to the controller and the handset | Connect with CB-2 |
5)Customized upon by customer
-Stroke 25mm~1200mm(1"-64")
Guests can customize the stroke according their needs. NOTE!The
longer the stroke is the weaker for the load.If you have special
needs, we can give you a special one .May more than 1500mm.
-Mounting dimensions
Mounting dimensions means when the actuator retracted, the distance
between the front and rear mounting section.
The Standard mounting dimensions is stroke+175mm, if you need a
shorter installation dimensions, minimum can be done stroke+150mm.
Can do any size larger than the standard mounting dimensions
mounting dimensions.
E.G
The stroke is 100mm .The Standard mounting dimensions is
Stroke+120mm (100+120)=220mm.The minimum can be done
stoke+105mm(100+105)=205mm.Can do any size larger than 250mm , such
as 500mm or 600mm and so on .
-Reed switch
We can make the the reed switch into the actuator , in order to
meet some customers' special needs.
-Load 50N-7000N(10 lbs-1540 lbs)
Customer can use the different load with their needs.The more load
the less speed.
