Hefei Elecman Electrical Co., Ltd. |
Verified Suppliers
|
|
ELECMAN ® 1/2" - 4" Galvanized Steel EMT Pipe Set Screw
Connectors Non-Insulated Type
Applications
ELECMAN® 1/2" - 4" galvanized steel EMT pipe set screw connectors
non-insulated type are meant to slide over the end of a piece
of conduit on one side, and tighten down to the inside of a box or
enclosure on the other end. You will almost always use both
couplings and connectors in every conduit run together.
Features
Certifications and Compliances
ELECMAN® 1/2" - 4" galvanized steel EMT pipe set screw connectors
non-insulated type shall be produced to the following
specifications:
Specification Data
ELECMAN provides full size galvanized steel EMT pipe set screw
connectors non-insulated type from 1/2" to 4".
CAT # | Trade Size | DIM A(inch) | DIM B(inch) | INNER PACK | MASTER PACK | WEIGHT PER C |
SCON050 | 1/2" | 0.880 | 1.445 | 50 | 500 | 19.50 |
SCON075 | 3/4" | 1.130 | 1.504 | 25 | 250 | 13.00 |
SCON100 | 1" | 1.380 | 1.753 | 50 | 200 | 17.08 |
SCON125 | 1-1/4" | 1.380 | 2.310 | 25 | 100 | 15.94 |
SCON150 | 1-1/2" | 2.750 | 2.250 | 10 | 100 | 7.26 |
SCON200 | 2" | 2.000 | 2.380 | 5 | 50 | 4.91 |
SCON250 | 2-1/2" | 3.440 | 3.190 | - | 12 | 6.50 |
SCON300 | 3" | 3.130 | 3.810 | - | 12 | 8.30 |
SCON350 | 3-1/2" | 4.750 | 4.310 | - | 6 | 5.00 |
SCON400 | 4" | 4.250 | 4.880 | - | 6 | 5.78 |
Quality Control
ELECMAN QC department pay much attention to controlling the
quality, the main part of the connector body is made of high
quality steel, every part of the connector are produced according
to the high standard.
Packing Information
Packing is so important, good packing can help customers to improve
the brand image, good packing also can help can help customers to
stock the products well for longer time, so ELECMAN pay much
attention to that, for EMT fittings, from 1/2" to 1", ELECMAN
provides inner box packing inside the outer box, from 1-1/2" to 4",
ELECMAN provides plastic packing inside the outer box.