1 Technical characteristics of double-head beveling machine
1.1 The equipment adopts PLC control, simple structure, safe and
practical.
1.2 The control interface is operated by touch keys, which is
convenient and quick.
1.3 Processing operations are easy to learn and understand.
1.4 The feed of the equipment uses a large torque stepper motor,
which has a fast response
speed and a large cutting force.
1.5 The overall device is a triangular design with strong
structural performance and is not easy to
deform.
1.6 The movement of the equipment is linear guide, and the
performance is reliable.
1.7 The upper stroke of the hydraulic tooling can be adjusted,
which can be used quickly and
improve production efficiency
.
1.8 The moving part of the equipment is fully lubricated without
manual maintenance, which is
convenient and reliable.GUOZHONG INTERNATIONAL LIMITED
1.9 Tooling installation part can move upwards, rotate left and
right, and adjust forward and
backward, saving labor and effort, no need to train professionals,
everyone can operate.
1.10 adopts high
-
power power head, large processing volume and high production
efficiency
.
1.11 Kinematic tool setting can be operated manually or manually on
the panel, which is
convenient for application.
2 Basic equipment operation:
First install the work piece tooling (elbow box) on the work
surface, and place the turned elbow
on it. Then, a needle
-
shaped pointer is mounted on the rotatable part of the power head
(usually
attracted to the top of the cutter head by a magnet) for adjusting
the concentricity between the
two ends of the tooling and the power head cutter head. Since the
worktable on which the work
tool is installed can be moved up and down, moved back and forth,
and rotated, it is very
convenient to adjust the concentricity of the tool and the cutter
head. When the adjustment is
completed, the upper part of the work tool is pressed down to
adjust the appropriate upward
stroke of the oil cylinder. Then measure the length difference
between the processed elbow and
the unprocessed elbow, enter it into the computer, and adjust the
appropriate processing speed.
The machining operation is ready
. The displayed manual should be done automatically, and then
press processing
3 technical details: 1 technical details:
Motion motor torque | 50NM |
Cutting power head power | 5.5KW |
Power head stroke | 400MM |
Cylinder stroke | 800MM |
Lubrication pump capacity | 1.5L |
cutting speed | 180-460 adjustable |
Adjustable distance under the working table | about 10MM |
Workbench adjustable | about 50MM |
The table rotates about | 40 ° |
Power of hydraulic station | 1.5KW |
Maximum linear movement speed of power head | 6.4M / MIN |
Hand control box can extend | 3M |
Total equipment weight is about | 3.7T |
Total power of equipment | 15KW |
Equipment size | 2700 × 2300 × 2250MM |
Company introduction:
Our company is professional manufacturer of pipe fitting machines,
such as hydraulic hot forming elbow machine, hydraulic cold forming
elbow machine, hydraulic cold forming tee machine, shot blasting
machine,Flange Marking Machin.
We have exported to many countries, such as, Russia ,
Egypt,Malaysia ,India ,Turkey ,Indonesia, etc.
We have overseas office in Mumbai, India. Our marketing person and
technician stay in abroad for 7-8 months each year for after sale
service. Machine guarantee is one year. If our clients machine has
problem, our after sale service person will come and help you solve
the problem as quickly as possible.
One time cooperation, whole life friends,hope we can start long
term cooperation in the near future.!
Contact:
Darcy Dong
Email Address: guozhong_darcy@pipefittingsmachine.com
Whatsapp/ Wechat: 0086 156 3073 1167