2000M3/h 380V Heat Recovery Air Handling Units for Hotel

Heat Recovery(Heat recovery wheel) Air Handling Units

Specifications:

Quick Model Selection for Typical Units

Note:

■ This table only lists some typical models among many models for quick model selection.

■ Total fan pressures listed above are tested on standard fans with rated air flow.

■  External residual pressure = Total fan pressure - Internal resistance.

Typical Unit Performance Parameters - Cooling with Return Air

Note:

■ Temperature of heated inlet water: 60°C; temperature drop 10°C.

■  Fresh air conditions for heating operation: inlet air temperature 0°C; return air temperature 21°C.

■  Coils are copper pipes with aluminum fins (12 fins/inch). EK can provide coils with 8~14 fins/inch.

Air filter

Note:

■  Primary efficiency filter: folding plate; 2 inch thick; nonwoven fabric filtering screen; G3 filtering efficiency (80-90% Arrestance).                
■  Medium efficiency filter: bag type; non-woven fabric filtering screen; F5 filtering efficiency (40-60% Dust-spot).                
■  Medium High/sub-high efficiency filter: super-thin fiberglass filtering screen; F7~F9 filtering efficiency (80-95% Dust-spot).                
■  High efficiency filter: if you need to installed sub-high or high efficiency filters for your knockdown air conditioning units, please contact                
EK directly.                
■ The resistance of the filter is somewhere between the initial resistance and the final resistance. Initial resistance refers to the resistance of a non-contaminated filter. Final resistance refers to the air resistance of a filter which is contaminated and needs to be cleaned or discarded. Final resistance varies depending on the cleanliness the environment and air in which the air conditioner operates.                
■  Besides standard configuration, EK also provides differential pressure gauges and switches for filters. The differential pressure switch controls the differential pressure alarm of the filter.                
■  Plate-type filters and bag-type filters have the same sectional area but different thicknesses. Plate-type filters are 2-inch thick; while the frames of bag-type filters are 1-inch thick, with a bag of 15-inch long.                

Description:

EK Air handling unit (AHU) air flow range is from 1,000m3/h to 300,000m3/h. Available functional sections include fresh/return air mixing section, cooling coil section, heating coil section, primary/medium/high efficiency filter section, electric heating section, humidifying section, sound attenuation section, heat recovery section, secondary air-return section, fan section, air diffuser section etc..

Equipped with double inlet forward/backward pitched centrifugal fans of international name brands and impellers and belt pulleys with motion/rest strictly rectified, the unit works more stably, quietly and efficiently.

The coil features a new type of specially processed antirust fins which can greatly reduce air resistance and motor power consumption. Multiple circuit designs are available for different working conditions to reduce water resistance and improve heat-exchange efficiency.

The water trap of the coil has two valves for water and air discharge, with a test pressure of 3.3MPa and maximum working pressure of 1.7MPa. A Pitched design for the heat insulated condensed water collector ensures smooth discharge of condensed water, leaving the circuit dry all the time.

Each functional section has a specially-designed airtight access door sealed by quality sealing strips. This makes it very convenient to service internal components of the unit while maintaining airtightness of the system.

Robust Structure

The surface of the unit is made of quality color steel, 0.5mm thickness , 1mm is optional ,which can resist corrosion, scratch and ultraviolet radiation.

Internal panels are made of steel plates galvanized with aluminum and zinc, 0.5mm thickness , 1mm is optional , with an assured service life of more than15 years. All panels feature end-to-end joints and smooth surfaces, without any bur or corroded point.

The unit panel has two thicknesses, namely 30mm and 50mm.Inside the panel, hermetically foamed polyurethane (no fluorine) with a density of 48kg/m3 is used as the heat insulating material. The heat conductivity factor is less than 0.02W/m°C.

Each functional section of the unit is equipped with a steel trough base, thus ensuring it is well supported, easy to transport and assemble. The overall robustness of the unit meets the standard of CEN2.

The unit features a special clamp structure, facilitating disassembly and maintenance as well as ensuring low air leakage. When the internal negative pressure is 1000Pa, the air leakage is below 1% (level B air leakage of European standard EN1886).

Return/Fresh Air AHU

Mixing Air AHU.

Reheating and Humidifying AHU

Clean Room AHU

Clean Room AHU with Return Air Fan

Vertical Air Handling Unit/Heat Recovery AHU

Applications:

Office, Hotel , Hospital ,Supermarket ,Airport , Factory ,Villa .

Competitive Advantage:

EK Patented Cabinet Structure Without Cold Bridge

• EK combined cabinet adopts the cutting –edge European design of inner frame structure without cold bridge.There is no part in the unit

that might cause cold air leakage, sharp corners are sealed using marine-level sealing technology, and the foaming materials tightly conform to the built-in frame to form a high-strength frame structure.

High-quality Filter

All EK air conditioners adopt the fold-type primaryefficiency filter and multi-bag medium-efficiency filter to enlarge the filtering area and effectively retain dust.Meanwhile, the optional high-performance electrostatic filter can effectively sterilize and remove dust from the air, and

eliminate bad smells and odor, achieving 90% PM2.5 capture and improving the air quality.