Home Companies Hunan EEXI Technology&Service Co., Ltd.

Class I 3 Ply Non Sterile Tie - On Face Mask

Hunan EEXI Technology&Service Co., Ltd.
Active Member

Contact Us

[China] country

Address: Add:No.6, North of Pingtou road, Liuyang Hi-tech industrial development zone, Hunan, China

Contact name:Luke Lin

Inquir Now

Hunan EEXI Technology&Service Co., Ltd.

Class I 3 Ply Non Sterile Tie - On Face Mask

Country/Region china
City & Province hunan
InquireNow

Product Details

3 Ply Non Sterile Tie - On Face Mask

 

 

Function:

 

1. Secure Tie One
Adjustable, fit comfortable, and attached to outside of mask to eliminate irritation

 

2. Extra-long Nose Piece
Enclosed aluminum nose piece forms a strong seal for maximum protection

 

3. PP outer layer
Soft, for maximum protection against fluids

 

4. Soft-Bound ultrasonics
Ensures strongest construction, eliminating holes and defects

 

Product NameFlat Tie-on, Surgical Face Mask(non-sterile)
ClassificationTYPE IIR
Standard Applied:EN 14683:2019+AC:2019 YY0469-2011
ColorBlue,white
Size17.5 * 9.5cm (customizable)
Material qualityNon-woven fabrics, Melt blown fabric.
Scope of applicationMedical, food, electronic and other fields.
Shelf life2 Years
Storage methodStore in a dry, well-ventilated, non-corrosive gas place, avoid high temperature.

 

Intended Use:

The surgical face mask is single-use, disposable device, provided non-sterile, and

intended to be used for patients and other persons to reduce the risk of spread of infectionsparticularly in epidemic or pandemic situations.

 

Structure and Components:

This mask is made by blank mask, nose piece and tie-on belt. The blank mask is made

by three layers. The inner and outer layer are non-woven fabric, the middle layer is Melt-blown polypropylene.

 

Main performance:

1) Bacterial filtration efficiency: ≥98%;

2) Differential Pressure: <60 Pa/cm² ;

3) Microbial cleanliness: ≤30 cfu/g;

4) Splash resistance pressure≥16kPa.

 

Instruction for tie-on face mask:

1. Open a mask, with the dark side facing outwards, hold the mask by hand and cover it

on your face, make sure that the nose clip is located on the upside of the mask.

2. Pull the mask belts above the ears and tie it appropriately on the top of the head.

3. Pull the rest of the mask belts below the ears and tie it appropriately over the back of the neck.

4. Adjust the nose clip to fit the shape of the bridge of the nose, and then adjust the tightness

of the mask belts to make the mask fit your face.

5. Do not touch the front of the mask when removing a mask. You are supposed to untie the

mask belts first and then discard it into an specified container.

 

Precautions:

1) Check the package is intact before use, conform the masks and date of manufacture

on the external package, and use it before the expiry date.

2) If you are allergic to non-woven fabric, be cautious using this product.

3) After using the product, please dispose of it according to the requirements of the

environments protection agency or related authorities.

4) This product is a disposable device. It is not recommended to the clean or reuse it. If you feel uncomfortable during use, please stop using it immediately or replace it with a new one.

 

Hot Products

3 Ply Hypoallergenic Medical Breathing Mask ASTM LEVEL 1 [Indication for Use] The Disposable Medical ...
3 Ply Hypoallergenic Medical Breathing Mask ASTM LEVEL 2 Instruction [Product Name] Disposable ...
3 Ply Hypoallergenic Medical Breathing Mask ASTM LEVEL 3 [Style] Flat-Pleated [Indication for Use] ...
3 Ply Hypoallergenic Medical Breathing Mask ASTM LEVEL 3 Model: YX001 Instruction [Product Name] ...
3 Ply Hypoallergenic Medical Breathing Mask ASTM LEVEL 3 [Indication for Use] The Surgical Face ...
3 Ply Hypoallergenic Medical Breathing Mask ASTM LEVEL 1 [Indication for Use] The Disposable Medical ...