Active Member
|
[China]
Address: 2 / F, Building C, Hongyi Industrial Park, No.4010 Banxuegang Road, Longgang District, Shenzhen,China
Contact name:Amanda Lu
Besdata Technology Company Limited |
|
|
For use in neuromonitoring procedures in conjunction with electrodes.Use a bell shaped cup electrode with the hole in the center.Apply just enough paste inside of the EEG electrode to very slightly overfill the cup. Place the electrode onto the electrode site and press with medium pressure. A small amount of paste may come out the hole.Pressing too hard will cause all of the paste to come out and electrode will not adhere well. Clean with warm water.
Our EEG paste contains the right balance of adhesiveness and conductivity, enabling the electrodes to remain in place while allowing the transmittance of electrical signals.
Features:
1, Adhesive
2, Washable and non-drying
3, Easy clean up
4, Water soluble, non-staining, non-gritty
5, Fast reduce Impedance
6, Applied with EEG Caps
8, Available in 2 sizes: 500g / 1000g
| Name | Model number | Specification | Pack(PU) |
| skin prepare gel | BD-P1 | 4oz/124g | 1 pc |
| skin prepare gel | BD-P2 | 500g | 1 pc |
| conductive gel | BD-C1 | 500g | 1 pc |
| conductive gel | BD-C2 | 1000g | 1 pc |
| conductive paste | BD-P8 | 250g | 1 pc |
