Home Companies Besdata Technology Company Limited

250g EEG Conductive Paste Reduce The Interface Impedance Between Electrode And Target

Active Member

Contact Us

[China]

Address: 2 / F, Building C, Hongyi Industrial Park, No.4010 Banxuegang Road, Longgang District, Shenzhen,China

Contact name:Amanda Lu

Besdata Technology Company Limited

250g EEG Conductive Paste Reduce The Interface Impedance Between Electrode And Target

Country/Region	china
City & Province	shenzhen guangdong
Categories	Newsprint Paper

Product Details

Conductive EEG Paste Reduce The Interface Impedance Between Electrode And Target

Contains:

Carboxymethyl cellulose, Polyoxyethylene (20) stearylether, Water,Glycerin,Lanolin alcohol,Coconut fatty acid diethanolamide,1.2 Propanediol,Potassium chloride,Sodium Chloride,Polyxoyethylene(20)sorbitol,Methylparaben,and Propylparaben.

Usage:

For use in neuromonitoring procedures in conjunction with electrodes.Use a bell shaped cup electrode with the hole in the center.Apply just enough paste inside of the EEG electrode to very slightly overfill the cup. Place the electrode onto the electrode site and press with medium pressure. A small amount of paste may come out the hole.Pressing too hard will cause all of the paste to come out and electrode will not adhere well. Clean with warm water.

Directions:

Store the paste in a cool place away from direct sunlight. Tighten the cap to prevent paste from drying. Do not use dried paste because the EEG waveform cannot be recorded.

Feature:

EEG Electrode paste with low impedance highly conductive gel,

specially formulated to stick the electrodes on the skin without additional adhesive disks.

Used with all surface applied electrodes.

Shelf life is 2 years unopened

6 months after opening

Applicable Instruments: All EEG and EP/EMG Instruments.

Name	Model number	Specification	Pack(PU)
skin prepare gel	BD-P1	4oz/124g	1 pc
skin prepare gel	BD-P2	500g	1 pc
conductive gel	BD-C1	500g	1 pc
conductive gel	BD-C2	1000g	1 pc
conductive paste	BD-P8	250g	1 pc