|
[China]
Trade Verify
Address: Room 903, Tower B, Qiuyi Road 58, Binjiang Dist., Hangzhou City, 310000, China
Contact name:admin
Hangzhou Ecoographix Digital Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
800 Automatic Foil Stamping And Die Cutting Machine
Product Description
Brief Introduction:
Ecoo-790 automatic die cutting & hot foil printing machine is consisted of feeding unit, die-cutting unit, stamping unit and
delivery unit.
Non-stop feeding and delivery, electrical control system are
available with the machine.
Specification
Model: ECOO-TDS800
Sheet thickness: 0.2-2mm cardboard E flute corrugated paper
Max. Sheet Size(mm): 800x580
Min. Sheet Size(mm): 310x310
Max. die cutting size(mm): 790x570
Max. stamping size(mm): 790x520
Inside chase size(mm): 940x610
Height of cutting rules(mm): 23.8
Inter-platen distance(mm): 51.5
Max. pressure: 200 tons
Min. gripper margin(mm): 8
Max. machine speed(sheets/hour): 7000
Max. stamping speed(s/h): 5000
The thickness of stamping plate(mm): 5(optional 4+1)
| Model | ECOO-TDS800 |
| Max. Sheet Size(mm) | 800x580 |
| Min. Sheet Size(mm) | 310x310 |
| Max. die cutting size(mm) | 790x570 |
| Max. stamping size(mm) | 790x520 |
| Inside chase size(mm) | 940x610 |
| Height of cutting rules(mm) | 23.8 |
| Inter-platen distance(mm) | 51.5 |
| Max. pressure | 200 tons |
| Min. gripper margin(mm) | 8 |
| Max. machine speed(sheets/hour) | 7000 |
| Max. stamping speed(s/h) | 5000 |
| The thickness of stamping plate(mm) | 5(optional 4+1) |
| Sheet thickness | 0.2-2mm cardboard E flute corrugated paper |
| Feeding pile height(mm) | 1300 |
| Delivery pile height(mm) | 1000 |
| Electric heating system | 10 zones |
| Stamping rolls | 2 longitudinal and 2 transversal |
| Min. foil width(mm) | 40 |
| Foil reel core(mm) | 25(1") 76(3") |
| Mine Motor(kw) | 7.5 |
| Total power(kw) | 40 |
| Air supply | 0.8-1.0 MPa, ≥0.6cbm/min |
| Overall dimension(mm) | 4900x2000x2000 |
| Weight of machine(tons) | 15 |
Feeding Unit
• Pile tray with handle allowing manual lateral correction of the
pile during production
• Stream-wise feeding system with a highest speed of 120 sheets per
minute
• 2 suction cups each for lifting paper, 2 suction cups for moving
paper
• Height and angle of suction heads are easily adjustable
• Electronic safety devices preventing feeder pile from over
ascending
• Micro-adjustment is available for transversal positioning of pile
table
• Precision double-sheet detector
• Easy changeover of pull and push side guides simply by turning a
bolt without the need of removing and replacing complete side guide
• 2 front guides with micro-adjustment and the side guide is
adjustable by wheel handle
• Photo-electric detector with automatic stop system on feeding
table in case of paper jam
• Separate drive controls of feeding unit & the main machine
for easy make ready
• PLC and electronic cam for timing control
Die cutting Unit
• Siemens main motor controlled by Schneider inverter control
• Micro-adjustment of cutting force by worm gear driven by motor
and controlled by touch screen
• The pressure accuracy can be up to 0.01mm
• Crank shaft made of 40Cr steel
• Machine frames made of Q235-A Steel, upper and lower platens made
of QT60 ductile iron with resin coated sand with Meehanite Die Cast
Iron Technology
• Cutting chase turn-over device
• Overload protection device with torque limiter for the highest
safety of operator
and equipment
• 7 sets of gripper bars with grippers made of lightweight and
durable aluminum
alloy with ultra hard coat and anodized finish ensure accurate and
consistent
paper registering
• After long run test and delivered in pairs, main gripper, chain
from Subaki,
Japan
• High pressure index drive system for gripper bar positioning
control
• Pneumatic lock-up and release of cutting chase
• Centerline system for quick job changeover
Stamping unit
• The 2 longitudinal and 2 transversal hot stamping axes fully meet
the customer's hot stamping needs for products.
• The uniform heating of 10 areas enables the product to show a
more uniform hot stamping effect.
• PLC control servo system.
Delivery Unit
• Safety photo-electric devices preventing over-ascending and
over-descending of delivery paper pile
• Adjustable depressor brush helps unloading paper from grippers
and piling up paper
• High pile design up to 1020mm
• Automatic auxiliary belt table available for non-stop delivery
• Feeder movement and speed control can be adjusted in the delivery
unit
Electric Parts, Operator Interface and Safety Detector
• The high speed Japanese industrial Omron PLC system
• Omron operator interface with touch screen
• Omron Electronic cam switch and encoder
• Electronic detectors, micro switched and photo-electric cells
controlled by PLC on entire machine
Automatic Lubrication System
• Automatic oil pump and distribution system for entire machine
with preset timer
• Lubrication oil distribution for gripper chains with individually
controllable valve for each chain
Safety Devices and Quality Approval of Components
• All electronic and electrical parts are CE approved
• Overload protector for the protector and equipment
• Gripper chain clutch for the protection of gripper bars
• Emergency stop buttons on entire machine for quick and easy
access
Packaging And Shipping
FAQ
Q: What about the Installation and after-sales technician support?
A: Our engineer can go to help the installation and provide the
necessary training. The buyer should take the round air plane
tickets and service charge and the local accommodation cost. Any
problems or questions, we will be at your disposal 7x24 hours.
Among our large amount of CTP installations worldwide, there are
also many end users (printers) who have purchased the CTP products
from EcooGraphix China directly and EcooGraphix technical service
team support these installations remotely with regular onsite
visits.
These end users Printers all run the CTP systems with full
satisfaction due to our robust quality, seamless remote service,
thorough training and maintanence. If you are a printer who is
considering purchasing directly from EcooGraphix China, there is no
hasle on installations, training and after sales service. We
guarantee your satisfaction.
