|
[China]
Trade Verify
Address: Room 903, Tower B, Qiuyi Road 58, Binjiang Dist., Hangzhou City, 310000, China
Contact name:admin
Hangzhou Ecoographix Digital Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Digital Flexo CTP Machine FL-400
EcooGraphix Flexo CTP Machine is used for Label, Trade Mark or Package Printing.
It can expose the Heat corrosive film, Digital relief printing plate (water-wash), Digital flexo plate (water-wash), Digital flexo plate (solvent based), or Thermal PS plate and so on.
Characteristic
Easy to use:
After placing plate, the only step you need to do is to press a
button to finish the plate loading within seconds.
Automatic Focusing:
The machine can be used for different thickness plate from 0.15mm
to 1.7mm. Dynamic autofocus system keeps accurate focus constantly
to ensure sharp dot.
Auto balance system of drum takes no more than 5 seconds to adjust
drum balance block to a position, make the drum stable in high
speed rotation.
Auto switch of laser channel:
When any laser channels breaks down, laser channel auto switch
system can continue output through the longest consecutive channel
that remains working to ensure non-stop production.
Linear motor:
More accurate, more simple and more reliable.
Long lifetime and warranty of spare parts:
Laser Lifetime: >10000h
Highlights
1) Superior dot quality reproduction proven by worldwide market:
1%-99% dot reproduction; Up to 250lpi screening, 2400 dpi or
1200dpi optional
2) Fully qualified:
for any thermal non-process plate and process plates.
3) Robustness and simplicity:
robust machine and easy to use. User friendly and simple design to
avoid human error.
4) Worldwide top class components and parts supplied by
international well known suppliers from Japan, USA, and Germany.
5) Long lifetime and warranty of parts:
laser diodes lifetime at more than 10,000 imaging hours.
(Approximately 20,0000 plates)
6) Long warranty of the machine:
3 years warranty (free replacement of all parts)
Low Cost of Parts: after 3 years' warranty, very low cost of parts.
for example, laser diode at US$250 per piece.
7) Guaranteed Service:
installation and training conducted by technical engineer from factory, ensuring best setup and training to be achieved. Regular remote maintenance to be conducted every 2 months. Proactively revisit by engineers to be conducted. 7x24 hours service response.
Specification
| Model | EcooSetter Flexo FL-400 |
| Imaging System | 16-channel |
| Output Speed | 1.25 m²/hour |
| Plate Sizes | Max. 430mm x 330mm |
| Exposing Size | Max.430mm x 330mm |
| Media Type | Heat corrosive film, digital relief printing plate(water-wash), digital flexo plate(water wash), digital flexo plate (solvent-based) |
| Plate Thickness | 0.14mm to 1.70mm |
| Resolutions | 4000dpi |
| Repeatablity | ±5μm (continuous exposing for 4times or above on the same plate with a temperature of 23ºC and humidity of 60%) |
| Interface | USB 2.0 |
| Plate Loading | Manual load and unload |
| Net Weight | 280kg |
| Machine Size(WxLxH)mm | 830 x 630 x 1056mm |
| Power Supply | 220v/50hz, 60hz, mainframe 0.5kw+vacuum1.5kw |
| Operation Environment | recommended:18-30ºC, Max.18-26ºC, humidity:10-80% |
Producing and Packing
Installation Worldwide
About Us
FAQ
1. What are your main products?
Our main products are the Prepress 4up and 8up Online/Offline
Thermal CTP, CTCP, VLF CTP and CTCP, FlexoCTP, Processor, Offset
Plates, inks, blankets, postpress packing equipments and so on.
There are over 3000sets CTPs installed worldwide. Our partners in
USA, Canada, Mexico, Colombia, Turkey, Hungary, South Africa and so
on are very pleased with our technician support service and product
performance.
We also have five offset plates production lines producing the
thermal CTP plate(single and double layers), positive CTCP
plates(single and double layers) and Chemistry free CTP plate.
You can get the prepress equipments and consumables all in one and
no worry about the after-sales service from our company.
2. Where is your factory?
Our CTP machine factory is located in Hangzhou city, which is about
1.5 hour by train from Shanghai.
You are warmly welcomed to visit our factory!
3. What is your warranty for the CTPs?
Three years' Laser Head and main spare parts for the CTP, one year
for the processor.
4. What is the Lead Time?
Usually 30-45 days, and we will try our best to meet your demands.
5. Can you also supply the Workflow and RIP?
Yes, we can provide the Workflow Brain New and RIP Compose
6. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the
necessary training. The buyer should take the round air plane
tickets and service charge and the local accommodation cost. Any
problems or questions, we will be at your disposal 7x24 hours.
