Shenzhen Vaporivy Technology Co.,Ltd |
|
2014 new invention new e-cig e shisha tesla mod with top quality
Skype: ecigvaporivy
The Tesla can detect external short circuits and disengage to protect the user. The tesla will also detect if the attached atomizers resistance is too low to safely draw current. In both cases the Tesla will disengage output automatically.
In constant voltage mode Tesla, the output voltage can be adjusted between 3.0-6.0V in increments of 0.1V. In constant power mode, the output power can be adjusted between 3.0W and 15.W in 0.5W increments.
Details of tesla vv
Specifications:
Tesla Body | 1pcs |
DCT Atomizer | 1pcs |
DCT Atomizer core | 1pcs |
18650 Battery | 2pcs |
Charger | 1pcs |
User Manual | 1pcs |
Gift Box | 1pcs |
Feature:
How do you use electronic cigarette TESLA :
1. The “-“ (minus symbol) button is the voltage and power reduction button. Pressing “-“ will adjust the current value of either voltage or power down, and the corresponding voltage or power numbers will be displayed on the OLED screen. When the unit is adjusted below 3.0V, or 3.0W, it will cycle back to the highest setting (6.0V or 15W.)
2. The “+” (plus symbol) button is the voltage and power increase button. Pressing “+” will adjust the current value of either voltage or power up, and the corresponding voltage or power numbers will be displayed on the OLED screen. When the unit is adjusted above 6.0V, or 15W, it will cycle back to the lowest setting (3.0V, or 3.0W.)
3. The large button is your activation button. To toggle the device between on or off, you need to fast-click the activation button 5 times (button presses must be very fast – within two seconds.) When the unit is off, there will be no output from the Tesla, and the OLED will not display. When on, the Tesla will be ready to use.
4. To check the Battery voltage, hold the “-“ button down for two full seconds while the OLED screen is on and unlocked. The Screen will then display the battery’s current operational voltage.
5. To use the atomizer resistance check function, hold the “+” button down for 2 full seconds while the OLED screen is on and unlocked. The screen will then display the connected atomizer’s resistance.
6. To toggle the device between locked and unlocked output states, press both the “-“ and “+” at the same time.