TEKO Industry Co., Limited |
|
High Pressure High Temperature Flexible Wedge Gate Valve With Flange End Butt Weld End
What is Gate Valve?
TEKO Gate valve (also referred to as a wedge or slide valve) is a device that fully opens and fully closes to start and stop flow.
The valve contains a gate that slides into the path of the flow to block the fluid path and out of the way of the flow to reopen the path.
Gate valves are typically used when a straight-line flow of fluid and minimum flow restriction are needed. They are well suited for high pressure and high temperatures, and can be used for a wide variety of fluid. Because the gate valve is symmetrical, either end can be the inlet, allowing flow to enter through either direction of the valve, otherwise known as bidirectional.
There are many designs for the Gate valve, including rising and non-rising stem, knife, slab, and expanding.
Execution
Basic design according to API 600
Face to face according to ANSI B16.10
Flanges according to ANSI B16.5
Flange facings: 0,06" raised face;
Pressure - temperature ratings according to ASME B16.34
Shell wall thickness according to API 600
Testing according to API 598
Trim standard: no. 1 main sealing 13% Cr / 13% Cr and No. 8 (Stellite 6 /13% Cr) upon request
Dimensions & Weight
Class 900 | Valve Size | in. | 2 | 2002/1/2 | 3 | 4 | 6 | 8 | 10 | 12 |
mm | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | ||
L-L1 | in. | 14.5 | 16.5 | 15 | 18 | 24 | 29 | 33 | 38 | |
(RF-BW) | mm | 368 | 419 | 381 | 457 | 610 | 737 | 838 | 965 | |
L2 | in. | 14.62 | 16.62 | 15.12 | 18.12 | 24.12 | 29.12 | 33.12 | 38.12 | |
(RTJ) | mm | 371 | 422 | 384 | 460 | 613 | 740 | 841 | 968 | |
H | in. | 21.56 | 27.56 | 28.15 | 28.69 | 41 | 49.63 | 62.63 | 70.69 | |
(open) | mm | 547 | 700 | 715 | 729 | 1041 | 1260 | 1590 | 1795 | |
W | in. | 11.81 | 14 | 15.75 | 17.69 | 22.06 | 24 | 24 | 24 | |
mm | 350 | 355 | 400 | 450 | 560 | 610 | 610 | 610 | ||
WT | in. | 90 | 110 | 123 | 148 | 420 | 650 | 1160 | 1700 | |
(Kg) | mm | 82 | 93 | 108 | 122 | 359 | 566 | 980 | 1450 | |
Class 1500 | L-L1 | in. | 14.5 | 16.5 | 18.5 | 21.5 | 27.75 | 32.75 | 39 | 44.5 |
(RF-BW) | mm | 368 | 419 | 470 | 546 | 705 | 832 | 991 | 1130 | |
L2 | in. | 14.62 | 16.62 | 18.62 | 21.62 | 28 | 33.13 | 39.38 | 45.12 | |
(RTJ) | mm | 371 | 422 | 473 | 549 | 711 | 841 | 1000 | 1146 | |
H | in. | 22.63 | 27.56 | 31.75 | 34.94 | 42.5 | 53.94 | 59.81 | 65 | |
(open) | mm | 592 | 660 | 692 | 907 | 1015 | 1145 | 1520 | 1651 | |
W | in. | 13.75 | 15.75 | 17.75 | 22.06 | 24 | 24 | 30 | 30 | |
mm | 350 | 400 | 450 | 560 | 610 | 610 | 760 | 760 | ||
WT | in. | 117 | 175 | 240 | 337 | 680 | 1228 | 2278 | 3260 | |
(Kg) | mm | 93 | 144 | 185 | 285 | 584 | 978 | 1990 | 2850 | |
Class 2500 | L-L1 | in. | 17.75 | 20 | 22.75 | 26.5 | 36 | 40.25 | 50 | - |
(RF-BW) | mm | 451 | 508 | 578 | 673 | 914 | 1022 | 1270 | ||
L2 | in. | 17.87 | 20.25 | 23 | 26.88 | 36.5 | 40.87 | 50.88 | - | |
(RTJ) | mm | 454 | 514 | 584 | 683 | 927 | 1038 | 1292 | ||
H | in. | 27.26 | 29.5 | 34.63 | 42.5 | 53.94 | 60.25 | 80.5 | - | |
(open) | mm | 700 | 750 | 887 | 1079 | 1370 | 1530 | 2045 | ||
W | in. | 13.75 | 17.75 | 22.06 | 28.38 | 18.13 | 24 | 30 | - | |
mm | 350 | 450 | 560 | 720 | 460 | 610 | 760 | |||
WT | in. | 132 | 206 | 256 | 498 | 1550 | 2395 | 4460 | ||
(Kg) | mm | 99 | 156 | 192 | 390 | 1230 | 1980 | 3700 |
Test Standard
Test Item | Shell Test | Seal Test | Back Seal Test | Air Seal Test | |||||
Medium | Water | Air | |||||||
Unit | MPa | Ibf/in2 | MPa | Ibf/in2 | MPa | Ibf/in2 | MPa | Ibf/in2 | |
Pressure (Class) | 150 | 3.1 | 450 | 2.2 | 315 | 2.2 | 315 | 0.5-0.7 | 60-100 |
300 | 7.8 | 1125 | 5.6 | 815 | 5.6 | 815 | |||
400 | 10.3 | 1500 | 7.6 | 1100 | 7.6 | 1100 | |||
600 | 15.3 | 2225 | 11.2 | 1630 | 11 2 | 1630 | |||
900 | 23.1 | 3350 | 16.8 | 2440 | 16.8 | 2440 | |||
1500 | 38.4 | 5575 | 28.1 | 4080 | 28.1 | 4080 |