OEM Intelligent Car Park Barriers Arms Parking Barrier Gate Safety
1. Special driving structure, no gears, non-belt
driving,maintenance free, high stability, longer life.
2. Special balancing structure design makes the barrier arm has the
feature of slow-starting, fast-running, slow-stopping.
3. It is running without arm-shaking.
4. The brarrier arm is 90 degrees running which excluding the
failure caused 360 degrees running.
5. Special low-speed aluminum housing motor integrated gearbox
design, low noise, fast heat-dissipation.
6. The driving mechanism has the desiging of intelligent
overheating protection system, in frequent use, it can control the
warming of the motor, makes the motor not burned easily.
7. The main engine adopts mechanical limit switch and photoelectric
limit switch dual protection, to avoid the problems caused by using
traditional magnetic switch which is easily interfered by the
8. Barrier gae tcan be chosen from 1m to 6m.
Model Selection and Differences
220V±10%, 110V±10%, 50/60HZ
Remote control distance
Max boom length
Motor Rotational speed
Communication with customers
1) Q: Connected power and press
open/close button but traffic barrier gate no action?
Check fuse and power in controller
Battery of remote control powered off
Change a new one
External protection circuit break or at protecting status
Open the barrier door and click OPEN/CLOSE button on control box
Same frequency interference
Check photocell and loop detector
2) Q:Connected power and press open/close button,traffic barrier
gate will move but even when it is at right position, the motor
still running and not stop?
Adjust the horizontal/vertical limit switch to correct position
Main controller failure
Change a new one
3) Q: Motor running but traffic barrier gate
arm no action?
Barrier arm at 45° position where is hard to move
Unlock clutch and manually rotate arm to horizontal or vertical
position then try again
Tension of balancing spring not suitable
Adjust spring exactly
Low working voltage
Check the voltage and power
4) Q: When opening/closing,traffic barrier gate arm
cannot reach right position (90° vertical & 180° horizontal)?
Length adjustment of connecting rod not correct
Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at
180° horizontal position if master rod and slave one are in the same
Nuts on the limit switch loose
Tighten the nuts when arm at 90° vertical and 180° horizontal
|Market||Revenue(Previous Year)||Total Revenue (%)|
|North America||USD 63,608||1|
|South America||USD 508,869||8|
|Eastern Europe||USD 3,180,436||50|
|Southeast Asia||USD 318,043||5|
|Mid East||USD 190,826||3|
|Western Europe||USD 1,017,739||16|
|Domestic Market||USD 954,130||15|
For the things that most customer want to know:
1. One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltae.
3. The surfaces of the system destroyed by wrong installation our
4. Broken by natural disaster.
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if
there is any.
The explaining authority of this product instruction and
service article belong to the production factory.