330KV Y type single circuit Transmission pole
This photo refers to our 330KV Y type single circuit transmission
pole, it is single circuit pole structure. On the tope of H pole,
it is OPGW or OHGW. This type structure looks like letter “Y” and
named Y type transmission pole, which is made by two same size pole
and connected by flange together.
Since 2004 MEGATRO being to produce and design every type of steel
poles and lattice towers for overseas client in utility
electricity, telecom and other application. These 330KV Y type
single circuit Transmission pole structures can be
manufactured with some type as follow:
(1) Flange connection
(2) Slip joint
(3) Step type
(4) Stagger type
(5) Others
MEGATRO can optimize design, to set a compact, narrow base,
the tower design not only advanced but practical, with an emphasis
on economic rationality to ensure safe and reliable operation.
Today, with over 10 years of experience and our commitment to
excellence, MEGATRO remains an industry leader in the manufacture
and design of steel tubular & monopole structures for all
Highway, Municipal, Custom, telecom, lighting and electric Utility
applications. MEGATRO has a complete staff of professional
engineering personnel trained in the PLS Pole program and three
different manufacturing processes for producing steel towers, poles
and other supports. We utilize the latest versions of PLS-CADD,
PLS-POLE, TOWER, AutoCAD and other CAD software.
The structure shall be designed according to load combinations
given as per IEC 61936-1 and as illustrated below:
Normal loads
1 Dead weight load
2 Tension load
3 Erection load
4 wind load
Exceptional loads
1 Switching forces
2 short-circuit forces
3 Loss of conductor tension
4 Earthquake forces
MEGATRO is one of the few manufactures who assemble a face of 330KV
Y type single circuit Transmission pole and lattice towers. This
attention to quality may not be the cheapest process but it does
insure every tower meets our high standards of quality. And it
helps to reduce on-site construction cost due to mismatched
assemblies. MEGATRO 330KV Y type single circuit Transmission pole
can accommodate a variety of cross-arm and other accessories. After
fabrication all 330KV Y type single circuit Transmission
poles are delivered to the galvanizing facility to be Hot DIP
Galvanized. Towers are processed through the facility by Caustic
Cleaning, Pickling, and then Fluxing. These strict procedures
insure years of maintenance free towers. Even we take secondary
finish for client again, which as duplex surface treatment.
Other information:
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
Minimum order: 1 ton
Fabrication standard: Chinese Standard or other standard which
client accepted
Steel grades
POLE SHAFT: Chinese steel Q345B, which same to ASTM A572 GR50
Other webs, bracing and not stress plate and angle steel: Chinese
Q235B, which same to ASTM A36
Plates: Chinese steel Q345B, which same to ASTM A572 GR50
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394
A) Dimension and tolerance for angle are according to
GB/T1591-1994, similar to EN 10056-1/2
B) Hot dip galvanization in accordance with GB/T 13912-2002, which
similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or
CWB standard
If any special requirement, we can design and discuss with
client.