Professional Automotive Adblue Emulator Diagnostic Tools For DAF

Quick Detail:

1)keywords:  truck diagnostic tool adblue emulator Box

2)  Item Type:  Code Readers & Scan Tools 

3)   Applicable Models:     Mercedez-Benz Man Volvo daf More

New Truck Adblue Emulator For DAF

Product Description

What is Adblue and where is used?

Adblue is a fluid used most commonly within the Euro 4&5 engines. It is essential for the cleansing and reduction of harmful emissions and is injected into the exhaust gasses cleaning the exhaust gasses before they enter the atmosphere. It is Stored safely within a separate tank on the vehicle, and is specifically measured and applied by spraying into the exhaust manifold, reacting with the gasses within it, creating the cleansing and catalytic effect. Adblue consumption is typically around 3% – 5% of the diesel consumption for a typical vehicle, dependent of loading weight and other relative factors.

Since 2006, the use of Adblue has been a fundamental requirement for many types of public transport including bus and trucks produced on or after that date.

What can Adblue emulator box do?

When the Adblue runs out, it will alarm and reminder to add the Adblue. After several alarms without adding the Adblue in time, the Running Engine will be forced to turn off. 

Fistly, If the Adblue is unavailable in some emergency condition, our Adblue emulator solves your problem to disable AdBlue system and bypasses electronic module of the Adblue system on vehicle. It helps you drive truck to where you could add Adblue. 

Secondly, This emulator helps to reduce Adblue Consumption.

The Truck Adblue simulator is very useful for persons who drive long distance transportation.

Decription for Truck Adblue simulator:

It’s very easy to fit AdBlue Emulator Box to any truck or bus equipped with AdBlue system and it will override AdBlue system instantly, it will stop the usage of AdBlue liquid. AdBlue Emulator Box disables AdBlue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system.

This device works without interfering to work of other electronic systems of the vehicle. AdBlue Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the AdBlue Emulator Box and you can install it on any supported truck.

PACKAGE SIZE: 

18x8x5 cm

LINE LENGTH: 

145cm

INSTALLATION:

The connections details diagram and wire colours refer to DAF 85-410 Year 2009, but the main procedure of the minusblue module does not vary. Before proceeding makes sure no faulty codes are memorised in the original ECU, ADBLUE liquid is higher than the reserve level and the truck batteries Are disconnected from the system.

WIRING:

5 conductors:-

1) RED (+15). To be connected to a 24V source enabled when the engine key is in the ON position. This connection will supply power to the minusble Module when the engine key is on (dashboard on).

2) BLACK (0V). To be connected to an earth.

3) GREY (+30). To be connected to a 24V supply always available to the Existing adblue system (E357 protection fuse and the adblue system)

4) WHITE (CAN H). To be connected to CAN H of the system.

5) BROWN (CAN L). To be connected to CAN L of the system.

The connections must be made under the box of the connectors located under the protection cover of the radiator (passenger side).

The two wirings of the CAN of the truck coming from the connector 56D, the supply in the connector 9A

The conductor of the ground of the adblue has the number 9136, but it is possible to use another ground conductor found by a multimeter.

ACTIVATION:

The minusblue module and the original adblue module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working.

It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 20A fuse(E357) and the existing adblue module.

If you want to stop and exclude the original adblue module from working, all that needs to be done is to remove the E357 fuse before starting the engine.

The minusblue module will automatically be activated.

To re-instate the original adblue module, all that needs to be done is to reinstall E357 fuse before starting the engine. The minusblue module will automatically be de-activated.

SELF LEARNING:

When the minusblue module is fully connected to the electrical circuit of the original adblue module, and after identification of the E357 fuse controlling the power feeding to the original adblue module the truck batteries can be Re-connected.

The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on (key on but engine still off).

1) Make sure the E357 fuse is inserted.

2) Turn on the dashboard (key on) and verify that the red led is on.

3) After approx 1 minute the RED led will turn off and the green led will turn on.

4) Switch off the dashboard (key off).

After this procedure the minusblue module will be activated whenever the dashboard is turned on (key on).

The result will be:-

1) If the E357 fuse is installed the original adblue system will be working. Both red and green leds will be on.

2) If the E357 fuse is not installed the original adblue system will not be working and the minusblue module will be activated. Both red and Green led will be flashing.

NOTE: ALL THE OPERATIONS WITH THE E357 FUSE MUST BE DONE WITH THE DASHBOARD SWITCHED OFF (KEY OFF).

LED FUNCTION:

KEY OFF: - RED OFF, GREEN OFF - NO POWER FEEDING.

KEY ON: - RED OFF, GREEN OFF - TRUCK NOT SELECTED.

KEY ON: - RED ON, GREEN OFF - WAITING FOR SELF-LEARNING.

KEY ON: - RED OFF, GREEN ON - LEARNING COMPLETED.

KEY ON: - RED ON, GREEN ON - DATA SAVED, MODULE NOT ACTIVATED.

KEY ON: - RED PULSE, GREEN PULSE - DATA SAVED, MODULE ACTIVATED

When this box connected - AdBlue system of the truck would be fully emulated, no errors related to AdBlue.

The box can be fast and easy installed to truck. You can disconnect it, reset and install into another truck.