Active Member
|
Address: No.11, North of Kaiyuan Road, High-tech Zone, Jining City,Shandong Province, China
Phone: 86-537-2350961
Contact name:Mr. elena
Shandong China Coal Group |
|
chinacoal05
www.chinacoalintl.com
m.chinacoalintl.com
we provide service of enterprise's customs declaration, inspection.
Product Introduction
The design concept of the product and first-class manufacturing process, the principle of plane centripetal force on grinding. Activities of the cutting tools on the knife shaft, generated by high speed rotating centrifugal force, maul cleared marking the surface of the cutting tools, to achieve clear. Its advantage is: contact with
processed surface hardness of the cutting tools, and little damage on the surface processing, mainly used in
hot-melt cold paint marking cleanup of the old line, has the characteristics of high efficiency, low damage and easy maintenance.X900 of hot melt line segment, segment touches the ground width is 220 mm, if clear ed after covering the old line, by adjusting the depth, the damage of road surface is small, clear surface level l off, hot melt covers good each other, form a perfect, after the province; If need to change, need to increase
removal depth, the line can be removed.
Technical parameters
Power | 9.0 HP HONDA (HONDA) gasoline engine |
Speed | 3600 r/min |
Driver | can walk by themselves |
Working width | 220 mm |
The grinding depth | 0-4 mm |
Remove speed | 500-700 m2 / day |
Life of the cutting tools | 80 and 2000-3000 m2 |
Knife drum shaft rod number | 4 axis |
Size | 500 * 600 * 1000 mm |
Turning | 110 kg |
150/200/300mm
