Network Wireless Telephone Home Alarm System with CE Approval

This home alarm system is a kind of Telephone Networking Alarm Console with 12 zones (8 wireless zones and 4 wired zones). It works with remote controllers (up to 8 remote controllers), various wireless (wired) sensors and wireless (wired) siren. The alarm unit can be stored 5 groups of pre-set telephone numbers (fixed/mobile telephone number and pager number). Once an alarm happens, the alarm console will activate on-site siren immediately; and dial pre-set telephone numbers at the same time. 

• Voice pre-recorded.
• Support to CONTACT ID protocol.
• Two timers can be set to Arm/ Disarm independently.
• Dial 5 telephone numbers (mobile and pager number). Alarm telephone is priority.
• Phone line be cut or short-circuit will send an alarm. (Indicator or siren for optional)
• 12-zones (8 wireless + 4 wired), 8 wireless zones can be expanded up to 24 sensors.
• Alarm delay (00-99 seconds) and Arm delay (00-99 seconds) can be set for corresponding zones.
• Access codes contains: 1 installer code + 1 master code + 8 common users’ code + address code.
• Main unit disassembly, slave detector disassembly, AC power cut, backup battery lower and salve detector power lower will send alarm.
• Automatically learning code between wireless PIR detector, remote controller and main console (8 wireless can be up to 24 zones and 8 remote controllers).
• Zone attribute can be programmed for fire alarm, medical alarm, emergency alarm at freedom. Each zone can be programmed with different remote controllers.
• Main unit and slave detector make communication times in 24 hours to check whether there is communication malfunction. If there is a malfunction, the main console will alert corresponding zone within 26 hours.

This home alarm is widely used in residence, marketplace, finance system and enterprise, with superior quality and high-tech.